Go Bottom Go Bottom

Clutch and flywheel removal on y354

View my Photos
Donwon
Join Date: Apr 2020
Posts: 3 Up north
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-04-27          199112

How to remove the flywheel and if any special tools needed?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Clutch and flywheel removal on y354

View my Photos
chuckles
Join Date: Jul 2003
Posts: 88 Eastern PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2020-05-15          199164

Been awhile for me since I did a clutch job, but you will need a clutch alignment tool that looks like a custom made dowel rod to set the disk and clutch properly as you tighten it.

Is th flywheel badly damaged? I guess so, I never had that misfortune, it have to be real bad for me to mess with it. You will need an appropriate puller for you situation. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Clutch and flywheel removal on y354

View my Photos
gears1
Join Date: Jun 2009
Posts: 0 London, Ontario
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2023-12-25          201762

Home made flywheel puller made from angle iron for a Jinma 284. Very simple and effective. ....

Picture Link
Jinma Farmpro Agracat Nortrac Clutch and flywheel removal on y354
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login