Nortrac 204c does not go into 4WD
cdjordan
Join Date: Oct 2014 Posts: 13 ky |
2015-07-28 193213
Hello something is wrong with the 4x4 on my 204c it does not go into 4WD.
I took the plate off in front of the gear shift and as I engage the 4x4 lever I can see something moving down in the casing. The drive shaft moves as the tractor goes forward and reverse, but the front end will not engage.
As I engage the 4WD lever it seems easier than normal,I still push in the clutch and let it out slowly and as the tractor starts to move is when it used to go into 4x4, but not now, any ideas what to do next?
Thank you !
Reply to | Quote Reply | Add Photo
Go Top
Share This