Model 1811 Cub Cadet about a 1988 or 1989
terra3bjc
Join Date: Sep 2018 Posts: 3 PA |
2018-09-06 197959
I have a Cub Cadet Hydro-stat that will not go uphill after it is warm, and it will not go up in either direction. It goes ok on the flat. Is there somewhere to check the pressure of this pump, and if so what is it supposed to be. I have a service manual and I went there to look, I found the pump page and it says go to page 2-94 and my manual does not have that page, go figure? Or is there another problem I should be looking at ( maybe linkage), and it seemed to do this like overnight shall I say. Thank you, will wait for an answer. Tom
Reply to | Quote Reply | Add Photo
Model 1811 Cub Cadet about a 1988 or 1989
Hogslayer
Join Date: Jan 2018 Posts: 45 Northern michigan |
2018-09-11 197964
The hydro has an oil filter located underneath near the differential. It may be clogged. Is the fluid level low? ....
Reply to | Quote Reply | Add Photo
Model 1811 Cub Cadet about a 1988 or 1989
terra3bjc
Join Date: Sep 2018 Posts: 3 PA |
2018-09-13 197970
Thank you for that info, but I already knew all of that. I am wondering if the governor plate and linkage could cause that, do you know ?? I changed the oil and filter last summer so I am sure it is ok, it was the first thing I checked. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This