Go Bottom Go Bottom

Stabilizer drop limit chains for brush cutter

View my Photos
survriggs
Join Date: Oct 2004
Posts: 9 Missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-05          118947

Does anyone have any solutions (preferrably pics) for placing 3ph stabilizer chains on a Kubota B7800 to limit the drop on brush cutter? Seems pretty cluttered back there to get chains down to the lift arms or back to the cutter.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Stabilizer drop limit chains for brush cutter

View my Photos
greg_g
Join Date: Jan 2004
Posts: 1816 Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-05          118949

No specific Kubota experience here. But the fact that you're considering check chains sounds to me like you've got a leakdown problem. If I owned a B7800, I think I'd fix the hydraulics, rather than apply a steel bandaid

//greg// ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Stabilizer drop limit chains for brush cutter

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-07          119050

As Greg mentioned, do you want the check chains as a cure for a leak-down problem, or just as a 'fool proof' way to set the minimum cut height for the mower deck?

If it is as a set height control, why not just use the little stopper on the 3pth lever, that's what it's for?

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login