Bobcat Skid Loader Ford 16L No crankshatft seal
Handiman
Join Date: May 2015 Posts: 22 Mantua, NEW Jersey Pics |
2015-09-29 193797
For anyone having trouble finding Crankshaft seals for Bobcat 1.6L engine, like on the 742, I suggest using ebay and plug in your size in mm. The size for the 1.6L engine is 36mm x 52mm. I suggest trying one of them that size and one smaller in case you have worn bearings try using 35mm x 52mm. I paid roughly $4 each on ebay with free delivery.
Also, if your lift cylinders leak try ordering alternate sizes from other sources. Cut off the ends and weld on to your replacement cylinders - much cheaper and better than the OEM. Bobcat wanted $400 per cylinder verses $140 I paid for heavier cylinders. Bobcat makes their impossible to repair - shameful engineering.
Reply to | Quote Reply | Add Photo
Bobcat Skid Loader Ford 16L No crankshatft seal
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2015-09-29 193799
I would have thought Bobcat bought their cylinders and did not make them had I been asked. Then what do I know. Well if ole earthwrks was still here he would have jumped on that one!! ....
Reply to | Quote Reply | Add Photo
Go Top
Share This