Picture 1: Brand New BX 25 This is as clean as it will ever be. The wrapping is still on the bucket.

Picture 2: Home made box blade I have been building my own box blade. I have used 1/2" x 12" plate for the box with 4" channel and 2" angle for most of the other parts.

Picture 3: Home made box blade I cut with a plasma cutter to reduce grinding slag.

Picture 4: Home made box blade I welded the box up and used corner bracing.

Picture 5: Home made box blade I used the 4" channel to make the cross pieces.

Picture 6: Home made box blade I had to use the loader to flip it over to weld the bottom joints.

Picture 7: Home made box blade Partially assembled.

Picture 8: Home made box blade Cutting out the ripper shanks.

Picture 9: Home made box blade I welded the rippers onto a 4 inch channel that will be adjustable up and down.

Picture 10: Home made box blade I made slots for the ripper channel to ride in.

Picture 11: Home made box blade Added 3-point hitch pieces.

Picture 12: Home made box blade Need some pins and some paint.

Picture 13: Home made box blade Hitched up...

Picture 14: Home made box blade It works great. I can tell the gravel will wear the un-hardened shanks down quickly.

Picture 15: Bucket Hooks Log Grapple

Picture 16: Bucket Hooks Weld Hooks

Picture 17: Bucket Hooks Weld Hooks

Picture 18: Bucket Hooks Weld Hooks

Picture 19: Bucket Hooks Weld Hooks

|