Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Looking at the panel on my L3130HST I can see where the indicators for the functions for manual and GST. So it would seem that the same panel is used for all of that series tractors just connected to the different sensors/switches depending on the transmission type. From what I have read the tractor is fully usable even if the panel should fail.

I really like my L3130HST.

L 3130 Info Needed
Kubota Tractors
Replies 21 Post by texbaylea

A comment: Every 4wd piece of equipment that I have dealt with tell you not to operate in 4wd on dry payment or hard surfaces. The front - rear ratios are never perfect due to tire inflation and wear differences plus turns. The torque variations put extra loads on bearings and gears.

Vernon

b2910 hyd noise in high gear
Kubota Tractors
Replies 17 Post by texbaylea

I have a Woods 5000 chipper/shredder which is essentially to same unit. I have the single speed blower and have used it behind a Kubota B6100E (12 PTO hp) just have to feed it a little more slowly. I now have a new Kubota L3130HST (24 PTO hp), works great but have not used it much yet. I think you could overload it and clog the blower but I don't think one person loading it is likely to do that.

Vernon

Blower option for Bearcat 70554 chipper
Operating and Attachments
Replies 5 Post by texbaylea

The Bearcat 70554 I saw looked identical to the Woods 5000 to me. You would have to put them side by side to determine any differences and I think that they would be small. Weight specs would be something to look at.

I paid $2300 two years ago for my Woods 5000.

Vernon

woods 5000
Operating and Attachments
Replies 4 Post by texbaylea

When you place the order for the tractor ask for the manuals and read carefully. Then when you get the tractor you will know all of these little things. After you have used it for a few hours go back and reread the manual, things seem to make more sense after you have had your hands on the tractor.

Vernon

Where is the parking brake on my Kubota
Kubota Tractors
Replies 6 Post by texbaylea

I have a Woods 5000 chipper shredder that I used behind a B6100E (12 pto hp)for a season. Worked fine, just had to go easy on the feed. I have replaced the B6100E with an Kubota L3130 but have not yet hooked up the Woods unit.

chipper shredder with pto
Kubota Tractors
Replies 18 Post by texbaylea

I have an older Bush Hog model SQ60R. The gear box has a sloping face on the back of it with a plug in the middle of it. I fill to the bottom of the plug which puts the fill level at about center line of the input shaft. I don't think that you should completely fill any gear box because of heat expansion. Hope this helps but your gear box may be of a different design.

Newbie bushhog gear oil Q
Operating and Attachments
Replies 5 Post by texbaylea

I had a B6100E for 20 years and always had to use the glow plugs to start. When it was hot it would start without but with more cranking and smoke. It was better to always use the glow plugs and minimize the unburned fuel.

B6000E-do u always have to use glow plugs when starting your b6000e
Kubota Tractors
Replies 10 Post by texbaylea

If there was a large difference in temperature (hotter) fluid expansion will make a difference. Direct sun exposure makes it worse. I have a grapple on the bucket on my tractor and I had parked it where I could easily see it from the house. I did not use it during the course of the next day but I watched it open up as the day grew hotter and then close back down as the sun went down. Get yourself a soft face hammer and tap the poppet valve on the male half to relieve pressure on that side of the system.

Loader
Kubota Tractors
Replies 7 Post by texbaylea

The schematics are in the last section of the service manual. I paid $82 and change for the manual but I have always found it to be money well spent. I had the manual about 3 weeks before the tractor was finally delivered so knew quite a lot about the tractor when I was able to start using it.

Vernon

Mystery plug
Kubota Tractors
Replies 6 Post by texbaylea

I just traded in a B6100E (2wd) with 600 hours in very good running shape for $1800 toward a new L3130. The price on the new tractor was a very good one so this is probably a good base value in south Texas.

Vernon

b6100DT with 350 hours
Kubota Tractors
Replies 3 Post by texbaylea

If you have a laptop computer you can get software and adapter called AutoTap. A quick Google search on the Internet will turn it up. As I remember it is less than $400. I have a scan tool but it would cost me about $8-900 to add a new cartridge for it. I will go the software route when I get new vehicles.

99 service engine soon
Pickup Trucks and Trailers
Replies 17 Post by texbaylea

I briefly considered the B7800 but have ordered a larger tractor so I don't remember the features of the B7800. I suggest that you check if the FEL can be purchased with a skid steer type of quick attach. You could then buy a dry material bucket that would have a larger volume. More money I know but more versatile in the future.

larger bucket for B7800
Kubota Tractors
Replies 6 Post by texbaylea

Thanks for all the comments. I had an additional question. If you are using an HTL with a piloted check valve, wouldn't that defeat the float function on the controlling valve?

I guess that I don't see that I will ever have a future need to use an implement that would utilize the float function on the controlling remote valve. I think that the term auxillary valve would be more appropriate but I haven't seen it used.

Vernon

When would you use a float position on remote valve
Kubota Tractors
Replies 9 Post by texbaylea

jrestill:

I placed my order for a L3130HST Wednesday and I ordered the LA723. I felt that I needed the extra height and weight capability. I don't have any serious slopes to contend with but I feel that with careful operation you should not have any problems with the LA723.

FEL size 3130
Kubota Tractors
Replies 11 Post by texbaylea

I know that the B6100E was last built in 1984. I have a 1983 model that has served very well with few repairs. If it has been taken care of it is a good tractor for light chores. If the serial number is close to 18000, it is worth maybe $3000 max.

Help Kubota b6100e need advice
Kubota Tractors
Replies 2 Post by texbaylea

StoneGate:
I am in the final stages of purchasing an L3130. I plan to use a 6' LandPride rear finish mower. I have a 4' LandPride RFM now that I have used for years. Keep the blades sharp and the quality of cut is excellent. That is one of the delays, the pricing on trading the current RFM. I expect to be able to mow close enough to the buildings and plantings that I can finish with a weedeater or the DR Trimmer/Mower. I am setting the L3130 up so I can do 90-95% of my work from the tractor seat. An L3130 with a FA723 loader with Quick Attach, pallet forks for the loader plus a grapple kit and tooth bar. I am convinced that it will do everything I plan on.

Tractor and Z Mower or just Tractor
Kubota Tractors
Replies 11 Post by texbaylea

Check out www.markhamwelding.com. Look at their grubber bucket. If your loader will accept skid steer attachments, it will be cheaper than most similar units.

Shrub Tree Shovel for Tractors
Operating and Attachments
Replies 5 Post by texbaylea

I have seen tractors on auto transports. Why don't you look in to companies that move autos for people moving great distances. Cost might be cheaper in a consolidated load.

Tractor shipping
Kubota Tractors
Replies 11 Post by texbaylea

Any one out there who raises truffles? I have sandy land that I am starting to clear the juniper and yaupon off of. This land also grows oaks like mad so should be no problem raising inoculated oak trees. Looks good on paper with about 6-7 years until harvestable but looking for anyone with current experience.

Truffles
Parts and Repair
Replies 1 Post by texbaylea