Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

And how many hours of labor?

New Holland TC 33D Hydraulics Problem
New Holland Tractors
Replies 56 Post by oneace

Me way of testing glow plugs... A pair of jumper cables. With glow plug they either work or they don't. Remove them hook them up to the jumpers if they get cherry red they are good. If nothing happens, guess what? There bad.<br>
<br>
The book calls for 3.2 hours to replace all of them. That is for some one with intermediate skill level. I do not know what your skill level is. But it is cold out side right now as you stated. You may just want to call around and find a shop with a cheap labor rate or some one that does side work.<br>
<br>
Also have you been plugging the truck in over night? If not That will definitely help. If you are I would sure not forget because chances are you Will not get it started in the morning until you get it warmed up with the block heater.

Ford 7 3L Diesel glow plugs
Pickup Trucks and Trailers
Replies 20 Post by oneace

Happy marry chrismhakwanzicha every one at TP. and have a happy new year. Be safe and don't clear snow drunk, have a designated pusher.

Merry Christmas
Just For Fun Off Topic
Replies 31 Post by oneace

What you have is called a two stage clutch. the first stage disengages the trans which is the stage that needs adjusted. The second is for the PTO which how you described it it is working properly. Adjusted correctly you should be able to push the clutch about half way in to stop the tractor put keep the PTO engaged. At that point you should be able to make gear changes as well.

Hopefully some one else might be able to explain it better as I am not that good at transferring what I am thinking in to typed words.

Clutch adjustment
Kubota Tractors
Replies 16 Post by oneace

It is not a "Deal". But it is in the ballpark. If I were you I would look more toward the TC line.

New to tractors
New Holland Tractors
Replies 4 Post by oneace

The trick is to get the PTO on the shaft first. You can normally get it on about 3/4 of an inch before you get to the locking balls. Once you have it on that far it is easy to pull the ring back with one hand and push the shaft on with the other.

Hooking up Mower
Mowers Field and Finish
Replies 18 Post by oneace

Yes that is a PA (Adams County) deer. The new regulations of at least three points on one antler they put in place a few years ago has really let the deer mature and create some monsters as pictured.

Green Plug
Kubota Tractors
Replies 10 Post by oneace

What about a steel welded template that has the exact size hole as the post 8x8 or 10x10. have it so it is bolted together for easy removal once the post is set. then have four long arms welded to it that would lay flat on the ground that you could run re-bar or stakes to pin it fast to the ground and eliminate movement. <br>
<br>
What you would do is line up the template with you string line pin it down. Drop you post down through it level and brace it with what should be very little effort. Once braced pull you stakes and unbolt it and move in the the next on. <br>
<br>
I am talking about 1" steel plate and heavy arms. The design I have in my head you woulw need to move it with the SSL.

System for rapid installation of square posts piles
Barns Pole Barns
Replies 22 Post by oneace

Dennis would you set up pic number 16 for me please.

Avatars
Website Operations Howto
Replies 32 Post by oneace

To make a short answer no. Sounds like that unit was beat pretty good. I would walk away from that one.

Checking out a used New Holland TC45A
New Holland Tractors
Replies 3 Post by oneace

If I remember right they were not that heavy. I am sure it changed the center of gravity some but not so much that I ever noticed. I probably took it on a steeper hill side than most operators ever would. And yest EW I no you are not most operators.

Has Anyone purchased or built a cab for TC35
New Holland Tractors
Replies 15 Post by oneace

I would not use a framing nailer to fasten decking as the holes are not to aesthetically pleasing.

Decks - Nail or Screw
Home Improvement
Replies 28 Post by oneace

I always install 134. From the brand new to the 20 year old. Why? Because that is what the book called for. Will the 90w hurt probably not but in the winter when the oil is below freezing you are going to lose allot of drive power until the oil warms up. You figure the front dif lasted 20 years in your machine using the 134 why change now.

Ford 1210 4WD Front Axle Lube
Parts and Repair
Replies 5 Post by oneace

The newer tractors have a heavier front axle and the mid mount frame uses five bolts instead of four. As far as breaking the frame I highly doubt it. They are just saying that to cover their own ass if some thing would happen. I think before I left I installed one or two of the 14 and 15LA loaders on the older tractors. there is an alignment pin on the mounting frame that will need to be cut off in order to install on your tractor.

Can a NH curved arm loader be safely used on an 02 TC33D
New Holland Tractors
Replies 11 Post by oneace

What happened to the color on the discussion page. It is all black and white. Tried refreshing and still the same.

site diversity
Website Operations Howto
Replies 9 Post by oneace

So find another dealer and talk to them.

can you verify this
Parts and Repair
Replies 14 Post by oneace

Really the only time you would have to worry about the phase of your drive line is if you were building or repairing it your self. When coming from the manufacturer they will be phased correctly. All new and modern pto shafts regardless of shape will go together just one way. I have run across some older square shafts that are worn that will go in any direction. Basically you want your shaft yokes to be in line with each other.

Syncronizing the PTO driveline
Shop Tools
Replies 17 Post by oneace

That would most likely be a PTO dyno not a chassis dyno.

Kubota s RTV
Utility Vehicles UTV/ATV
Replies 59 Post by oneace

Yeah and it is easy to not have to rely on banner ads when OSAMA is sending you a check every month.

c-ya
Everything and Anything
Replies 58 Post by oneace

For get the colored rings. They are wrong. Once again the dealer was too cheap or lazy to put the yellow and green ones on. what you need to do is disconnect from the Blue and red and plug in to the yellow and green. Might get ti wrong the first time but no damage will result just flip them till you get float. the sub frame comes with its own manual.

TZ25DA and Front Mount Blower Questions
New Holland Tractors
Replies 6 Post by oneace