Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Looking for bucket for this Long 510 4 Wheel Drive <br>

Long 510
Long
Replies 1 Post by Mark

I have a two year old TC45D with an ongoing safety problem. After setting the parking brake, it will disengage when pressure is applied to the foot platform (as in stepping off the tractor!). This happened so often that I have stopped relying on the brake. Anyone else experienced this problem? I have not contacted NH yet, but I will.

Thanks for you comments - Mark in VA

Parking brake problem
New Holland Tractors
Replies 4 Post by Mark

A 20hp 4wd tractor will pull a one bottom plow easy and depending on you soil maybe a two bottom but it's not likely

deep tilling
Operating and Attachments
Replies 17 Post by mark

stan,
we are going through the same thing right now.
i was told for first year pastures(ours is)its good to
let it go to seed and then mow it about 8 inches high.
i was worried that the cuttings would smother out the
grass but they said that should'nt happen if you have a good cutter and dont go too fast while your cutting.
hopes this helps

Its growing now what
Parts and Repair
Replies 5 Post by mark

we went through the same thing last fall
and ended up with a tc33d also.
price was a factor (green was 3000.more)
and you get less. but what really sealed the deal was the dealer and the supersteer! love it!!

Difference between JD 4320 and NH TC33D
New Holland Tractors
Replies 8 Post by mark

I am getting ready to the recommended 100 hr work on my B7500 and noticed that I will need to clean the fuel filter element. The manual says that I should bleed the fuel system after, but it's not real clear on how to do this. The directions are to fill the fuel tank, start the engine, run it for 30 seconds, and then stop the engine. That's it. Is that really all there is too it? Seems like my manual is missing a step or two. Also, what would y'all recommend cleaning the fuel filter with? Thanks.
-Mark

Fuel Filter
Kubota Tractors
Replies 4 Post by Mark

I would swear that I saw a discussion a year or so ago about tricks to remove belly mower decks but I can't find it today. I have a B7500 with FEL and a 60" deck. How do you all recommend getting the deck on and off for sharpening blades, working with the loader outside of mowing season, etc? Any tips would be appreciated.
-Mark

mower deck removal
Kubota Tractors
Replies 3 Post by Mark

Got a price on JD4400 hydro,turf tires and mid pto.Also
JD430 loader and newly released 72" "9 iron" deck.$17100,
$3500,$3000=$23600 Should I sign or keep looking.

JD 4400 Price check
John Deere Tractors
Replies 2 Post by Mark

we just bought a nh tc33d w/ss, ind. tires(loaded), 7308 loader,
68" hd bucket, toothbar, q.t bucket , 2 rear remotes, armrests and top/side hyd links total w/ tax was 20000.00

New Holland TC33D
New Holland Tractors
Replies 8 Post by mark

The discussion group has been very helpful in selecting my tractor.
I'm now ready to buy. My best quote for a TC 45D with 16 LA Loader(6'bucket)
is $22,500. That's $18,900 for tractor with industrial tires
, fluid filled, and $3,600 for bucket.
Is that a good price based on anyone's personal search?

TC 45D Price
New Holland Tractors
Replies 8 Post by Mark

I just bought a used 2001 Cub Cadet 7260 and am trying to figure out what type and where to install an engine heater. The soft plug holes are only about 3/4" OD so I don't think that will work. I did find a ~1" threaded hole down at the base of the injector pump that appears to go into the block, but not really sure what that is for. I have seen smaller (3/4" to 1") threaded engine heaters at the parts stores, so this may be the spot to install one. I emailed Cub Cadet a week ago and got no response. There is the possibility of a lower radiator hose heater which to me would be a last resort, due to potential for leaks. I checked with the local cub dealer who has never sold the compact diesel tractors (only lawn care equip.) and he called another dealer and they came up with a crazy price of $138 for an engine heater. Not sure what type they were quoting. Any advise would be appreaciated.

Cub Cadet engine heater
Cub Cadet
Replies 3 Post by Mark

hi mark, we just bought a 2001 tc 33d w/ r-4's {loaded} 7308 loader and supersteer
and the best deal we could get was 17400.00 w/o tax.

TC-33D Price check
New Holland Tractors
Replies 7 Post by mark

I am looking for a small loader for a JD 655 tractor. I am under the impression that a JD 51 loader will fit this machine. Any one know if this is true? When I called the local JD dealer they said that was to old of a tractor to purchase a loader for it and did not give me any more info. Any one know where I can purchase a used loader for this machine?Thanks, for your help,Mark

Loader for a JD 655 tractor
John Deere Tractors
Replies 7 Post by Mark

Thanks for all of the thoughts. It looks like I'm going to be helping him move the tires out to a wider position this weekend. Any thoughts or suggestions?

rear wheel width
Parts and Repair
Replies 6 Post by Mark

hello all,<br>there is a implement place very close to me <br>that has howse rotary mowers on sale. there price on a 5ft 40hp gearbox is 440.00 but if you bring there ad in from the newspaper they will give you another 10% off! =396.00!<br>(+tax 6%). so do you thing its worth it or should i spend 175.00+ for a kingkutter or other brand. it will be used at first on some pretty rough stuff 1-2 inch but after that first cut it would be "probably" used on pasture grass.

howse rotary mower
Operating and Attachments
Replies 4 Post by mark

Was curious if anyone knows of an aftermarket source for folding ROPs for older tractors? Specifically,I am looking for a folding ROPS solution for the JD 70-series tractors. Thanks in advance. Regards Mark.

Availability of aftermarket folding ROPS for JD 70-series tractors
John Deere Tractors
Replies 2 Post by mark

Todd, I too have a JD950 and I believe the side oil filler was offered for convenience only. If you have a loader and brush guard on your tractor you'll know what I mean, as it is a hassle to open the hood on the tractor. With a side filler you can check and top off your oil without raising the hood altogether. It is a lot easier that way. As far as which is the preferred filling port, me personally, I would opt to use the top port. IMHO, filling from the top coats the engine better and helps combat the "lubrication flow delay" after an oil and filter change on the tractor. Just my 2cents here. Regards Mark

JD950 Oil Changes
John Deere Tractors
Replies 4 Post by mark

greg,
we ordered our top and side link from our local new holland dealer.
i think they were tisco,gannon or gearmore? anyway they should have a
listing for them. hope this helps. mark

Hydraulic Top Link
Tractor Projects
Replies 94 Post by mark

For a comparison, The swapsheet (in Upstate NY) listed a used JD-4600 with shuttle tranny and JD-loader/backhoe for $26K; just recently. As I recall, the tractor had roughly 325 Hours and I think was 1997. Hope this information helps and good luck. Regards Mark.

Sell price of 4300 w 112 hrs mid PTO 430 48 3rd SCCV
John Deere Tractors
Replies 2 Post by mark

Ron-
I have a B7500 with 60" midmount finish mower that I use in a field that sounds similar to yours. Ideally I'd use a brush hog, but like you, I can't afford both the finish mower and a brush hog. I use what I have for both the "yard" around the house and the "field". The finish mower does well in the field, even when the grass gets tall. I cut it regularly enough (every couple of weeks) that the sapplings don't get big enough to cause a problem. I might be taking a couple years off the life of the mower in the long run, and one day I'll probably get a brush hog. In the meantime my field is a little neater looking than my neighbor's who uses a brush hog. Also, for my own education maybe some of those with more experience can comment: will a JD790 run a 72 inch rear mount mower?

FINISHING MOWER OR ROTARY
Mowers Field and Finish
Replies 13 Post by Mark