Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Tom
No, they are retractable, but what are top link scrifers? And - I do not understand what you mean by you do not touch the 3ph (does that mean 3 point hitch?) except for dumping, or the next sentence (on the fly?).?
I never said it didn't take me all day, but actually it didn't.the roads do not go across the slope. They run parallel to it downhill. Perhaps I should explain in more detail - At toe top of the hill everything is level (more or less, this is where the roads begin, one right next to the other. as you go downhill they seperate by way of grade, the lower one being a bit steeper than the top, and it is at the bottom of the slope that they reach a seperation of 8/10', this is because not the lower road is 8/10' below the top road. the horizontal distance of the roads is about 200' The teracces will be perpendicular to the roads.
The only heavy vehicle that will be used on those roads is my tractor. What does rip-rap mean? I have never heard that term. You are going to have to use laymans terms and talk tome like a teacher because you are going way over my head with these terms. Is there a tractor users language book that I could read... Well you are getting too terchnical! Your elaborations will not help if I cannot understand what you are talking about... OK?

Murf
Top of the hill, OK.
So instead of backing over the dirt I try to go betweenit and the bank, well that will help a little, then only two tires will be packing it down instead of four, OK, thanks.

Thanks to you both!!!!!!!!!!!!!!!!!

Terracing my property
Garden and Landscape
Replies 30 Post by Reberta Young

I need original type AG tires and rims (in good shape) for an 1810d.

Front wheels and tires for an 1810D
Yanmar Tractors
Replies 22 Post by J K

I have a B2910 with the LA402 loader. I seem to smell hydraulic fluid when I use the loader for an extended period of time. I do not see the hydraulic reservoir decrease. Is this normal?

Hydraulic smell when using loader
Kubota Tractors
Replies 2 Post by cdmaeng

Just finished replacing and re-welding the 1/2 4 x 11 plate edge that the 3 teeth of my 12 inch backhoe bucket were attached. The original plate pulled lose with welds that were "cold" and looked like loose caulking on a window pane with no penetration to side metal. Check it out guys cold welds are lurking to get you.

cold welds on backhoe bucket teeth edge
Loaders Back Hoes
Replies 10 Post by jeff r

Tom,

Let me know how it works, I have considered ordering one for my B-2150 for a long time.

Jeff

First post Can a tach be put on
Kubota Tractors
Replies 3 Post by jeff r

The stabil bottle I looked at said it was for diesel fuel or gasoline.

Stabil any good
Parts and Repair
Replies 8 Post by kwschumm

Greetings
Thanks for the tips gentlemen. I have noted the tips and will investigate the quick hitch options. The landscape timbers and pad also sound good and worthwhile. I will let you all know how my next hookup adventure turns out.

3pt hookup secret
John Deere Tractors
Replies 12 Post by tracer

I used power plant from whitetale institute. It did not say you had to. I just brodcasted then disked them in. mine are kinda growing hit and miss. dom't know what to think just yet. I'll be putting alpha in it's place in sept. power plant is a mix of cow peas ,beans , sunflowers . look at web site I posted in earler post to check it out

food plots
Website Operations Howto
Replies 30 Post by plots1

I have been useing the thick black moly type grease. What is driveing me a little nutty is not the grease on the outside of the joints or on the nipples but it actually seems to be throwing grease. I mean there are strands of it in spotches on the outside of the loader arms like you would expect to see thrown off a uncovered wheel bearing. If you bend over the machine to open the hood you get greased. I'll also confess to likeing to spit shine as its still new, lol.

Loader Grease ARGH
Parts and Repair
Replies 10 Post by Misenplace

Chief, my ProJet washer arrived today. Here's a review.<br>
<br>
It arrived in two boxes via Fedex ground. The biggest box contained the CAT pump attached to the Honda GX-270 engine and mounted to the frame base with wheels already attached. The smaller box had the handle, oil, hose, wand, and hardware kit that had the six nozzles and attachment hardware required for assembly. It was all well packed.<br>
<br>
I looked for manuals and didn't find any - a call to ProJet confirmed I should have received an envelope with manuals and startup information and they said they'd ship them to me.<br>
<br>
How hard could it be to assemble and startup? Bolting the handle to the bottom frame with the four supplied bolts, nuts, and washers was very straightforward. I then had to attach the quick disconnects to the pump and the hose. The pump end was already wrapped with teflon tape but I needed more teflon tape to attach the disconnects to the hose. Since I couldn't find the tape I have (it's here *somewhere*) it was off to the hardware store to buy some. Once all the disconnects were attached everything snapped together.<br>
<br>
I had no instructions on the pump, but it has a sight glass on the end and the oil level was up to the line so once I removed the pump vent tab labeled "remove tab for operation" I figured it was all set to go.<br>
<br>
The Honda engine was shipped dry so I needed to fill it with oil. It had two oil fill caps which was sort of confusing. I went online and downloaded the engine manual from Honda's web site. One of the filler caps was for the engine and the other was for the transmission. Transmission? Not sure what that's about. I added a quart to the engine filler and then cracked open the transmission fill cap and some oil seeped out. Since it seemed to have oil already I proceeded. Set the choke, open the fuel shutoff valve, set the throttle to 1/3, one pull on the starter and it started right up. I was impressed!<br>
<br>
I only ran it for a couple of seconds since it wasn't hooked to water yet. My first job was to wash the deck. I moved it around to the deck, hooked up the water, and started it right up. Man, I love this thing - it did a beautiful job, and is much quieter than the Karcher I used before.<br>
<br>
The hardware is top-notch, chromed steel wand, big beefy connectors that connect with a "snick" sound that just exudes quality, beautiful machine work on the pump (and it's a pretty anodized blue color!), sturdy frame, smooth pneumatic wheels with zerk fittings, a nice flexible 50 foot hose with built-in stress reliefs on each end, and a trigger assembly that is a work of art and incredibly easy to control.<br>
<br>
Complaints are few. It came with a hose that was stamped 3000 psi, but the washer is a 3200 psi unit. I called ProJet and they said the hose had a burst rating of 12,000 psi and would work fine with the unit. That didn't give me a warm fuzzy feeling, but it is covered by the warranty so I let it go - for now. I will contact the hose manufacturer and verify this information. The unit has a larger footprint than should be necessary so it's a little cumbersome to move around (especially up the stairs to our deck). The cart has no built-in storage for the wand so it just lays across the cart anywhere it fits. Lastly, they really should have shipped the manual set with the unit. I get the impression that ProJet is overwhelmed by their web sales and is really trying to staff up and service customers at the same time.<br>
<br>
All in all, I really like this unit. The five year pump warranty and two years on everything else gives me a lot of confidence that this unit will do everything I need it to do for a long, long time.<br>

Best Pressure Washer for Father s Day
Home Improvement
Replies 62 Post by kwschumm

No, my backhoe is on the BX22.

The BX2200 weighs right at 1300 pounds. I don't have a brochure for the 2210, but it must be a little lighter than the 4010 which comes in at 1420#

I did a lot of research and reading which lead me to the conclusion that my 4100 and it's spin-offs are not suited for a backhoe.

2210 backhoe
Loaders Back Hoes
Replies 11 Post by DRankin

These tractors although rougly similar to the C series CIH in appearance are not cloned from any other tractor except Eicher themselves. They have air-cooled engines, with each cylinder being independently cooled. Standard shidt transmissions with out board "bull gear" reduction. This is just the particular styling the Indians chose for the US. Market after several years of market research. New updates to the styling are in the works. It will look similar to the existing 485 that are sold here now. Should be here by October. Click on pic to see 485 and its appearance.

Although the 6100 tractor is from the Valmet design, it is not as similar to the old 365 as it is to the newer 600 and 700 series tractors. What may be posted on the net is an older version of the tractor. The sheet metal has been changed to the updated version of the 600 Valtra. Also, you will find that the castings and design of the basic tractor are identical, with some of the items on the three point hitch being "beefed" up for the Indian and US Market. The transmission is the same (Spicer) with the exception that it only has hi and lo with the med range as special order option. 4 Wd is now available on Special order for this tractor. Eicher has decided to give all the tractors one look and this includes the 6100. It is now available in India with 2 sheet metals. The idea is that it will be cheaper to produce. Also this sheet metal will be availble only in future 7100 series.

Eicher of India tractors
Other Tractor Brands
Replies 2 Post by marklugo

Looks like I may go with the GST transmission instead of the HST. So the price will drop from $16800 to $16300.

GrandL 3830 Price quote received - Is it any good
Kubota Tractors
Replies 9 Post by clvickers

If my calculations are correct, the 2910 makes 60.6 ftlbs of torque at 2600 rpm and the TC33D makes 61.9 ftlbs of torque at 2800 rpm. That puts the two tractors a lot closer together then if you were to just look at the HP.

horsepower vs displacement
Kubota Tractors
Replies 48 Post by Foghorn

DrMorgan, you are correct in your assumption, running two tractors in tandem involves towing one tractor with another. The origin of the process was back when things were pulled by animals, a tremendous load could be pulled on fairly flat land and over quite a distance, but a hill both unecessarily tired an animal, and it was dangerous, if they lost their footing, or ran out of energy, both the load and the animal could be lost. It was common to position a spare team at the hills to assist others up & down the hill.

What we do is little different except we use long steel cables and tractors. On particularly nasty hills we use a dozer with a cable winch to drag them up the hill. The really tricky part is getting the two units syncronized, and keeping them that way. If the lead tractor is not pulling enough the one on the hill can slip, if the lead unit tries to pull too hard it can slip, either case is a really bad thing. We use two way radios with handsfree with headsets so that the two units can stay in sync. by calling instructions, usually just a number which represents the rpm's since there is no such thing as shifting on a hill that steep. The key is to have the lead tractor at least over the hill and hopefully on a down-grade, then there is some gravity as well as tractive power at work.

Best of luck.

Freaked out about rollovers
Parts and Repair
Replies 68 Post by Murf

Belarus is also known elsewhere in East Europe as MTZ tractors, at least the ones from the Minsk plant.

To Belarus or not to Belarus
Belarus
Replies 28 Post by marklugo

It can also mean any tractor imported into North America that is used. Used tractors are not subject to tariffs.

Usually the tractors in question are missing one or more things we associate with new tractors these days, such as ROPS (Roll bars), PTO Shields, three point hitches, matching/easily attached loaders, mid pto's, power steering
seatbelts and modern hydraulic systems.

Grey market tractors
Other Tractor Brands
Replies 3 Post by DRankin

Anybody know where I might be able to find a front dozer/snow blade for an old B6000?

snow plow
Kubota Tractors
Replies 18 Post by dfarnjr

Thanks for the info concerning fuel cell sensor leaking problem. Went to the dealer where it was purchased new and they provided a kit for correction without charge. Got around to installing it this past weekend and naturally the job which should have taken a couple hours dragged out to the better part of five or so. Biggest difficulty was trying to turn the set screws that locked the modified sensor into the fuel cell. Ended up having to heat a screw driver with a torch to put a 90 degree bend in the tip so I could reach the screws under the frame.

Thanks again for your info

BX2200 Fuel Cell Leak
Kubota Tractors
Replies 5 Post by emgall

I have to guess that the loader valve assembly is spliced into the high-pressure line going to the 3ph and that the valve doesn't have a separate low-pressure (TANK) return line directly to the reservoir. I seem to recall an earlier discussion and it sounds like you've straightened out the valve question and the project has proceeded well.

There are a couple of ways the 3ph could be affected. Many valve assemblies have relief valves in their inlet sections that are separate from any circuit relief valves. These relief valves would see pressure developed by a 3ph load and may open (especially if the settings were backed-off) so the 3ph may seem to have little power.

The loader valve is installed ahead of the 3ph and for valves with TANK returns operation of the loader cuts off oil flow to the 3ph so the 3ph will not lift while the loader is operated. For valves without a TANK return, the cylinder exhaust oil goes back into the high-pressure line. If the 3ph is in lift mode during a loader operation the loader cylinder exhaust oil goes into the 3ph lift cylinder. The pump then is lifting both the loader and 3ph loads.

I'm not sure how the single acting lift cylinders and valves are set up. I suspect that for lowering they simply open a port to the high-pressure line and exhaust oil simply is added to the normal open center flow. I am not sure what would happen if the loader was lowered while the 3ph was in lift mode. I think I've seen some single acting cylinders that have separate feed and return lines. There may be a check valve in a return line but if there were then the loader lift probably wouldn't as a float if placed in lower mode.

This is getting long so I'll save any thoughts about the valve handles.

Loader works
Yanmar Tractors
Replies 2 Post by TomG