Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Gary - I have some direct experience here. I run an old (maybe 1970's-ish?)

Chipper PTO driven
Operating and Attachments
Replies 10 Post by Steve Offiler

Hi Chuck,<br>There seems to be a problem with my 4400 hst. my friend has a 4300 hst and has had not one problem. I mow with a finish mower on well kept lawns. I really don't like the tire scuff when turning that is as the dealer puts it

I took delivery in october for machine i ordered in june
When I had about 20 hrs. on it the pto locked up when I stood up to check the saftey interlock in the seat.and the tractor wouldn't even start or move. That took over a month to get fixed because there were no parts available. Then at 40 hrs it had some prblems with the hydralic pump that cause the bucket to run slow (5 days in shop). then at 60 hrs the 3pt went haywire (2 weeks in shop).
All in all I hope my experience is unique. I have had 2 other Deere compacts (755 1000+hrs and 955 700+hrs, 955 i still own) i never had one problem with them.
I am not really hard on my machinery, I take very good care of them. But this is really begining to get me down. This tractor is good when it works, it will dig like a Bobcat and pull like a Kenworth, when it works. If you would like to email me I will detail how the tractor is getting along now. "> Getting John Deere to listen to me
John Deere Tractors
Replies 6 Post by mike

i just bought a 7360 . I paid 14700 and have still yet to get a loaded. however i looked at the cub loader a was impressed on the quality. i like my cub very much

Cub Cadet 7265 vs N H tc25d
Cub Cadet
Replies 4 Post by RANDY

I just checked on a TC21D with a 60

a price of $13,320.00. They also quoted me $2875.00 for the front loader.
I have not purchased the tractor yet, I am doing the same as the others, I am
comparing JD, Kubota, and NH. As well, I found that for the money, NH offers
the most options for a smaller price. These prices were form a dealer around the
St. Louis area. "> TC21D price
New Holland Tractors
Replies 3 Post by JOE GNADE

Try Monroe Tufline I have been abusing mine for 4 years and it is still as strong <br>as the day i brought it home from the dealer.<br>http://www.monroetufline.com/

nh1720 tractor
Other Tractor Brands
Replies 5 Post by Paul

the long drain interval isnt an option when you have a tractor due to dusty environs and<br>the loading up of the oil with conataminants. i use mobil 1 but i think anyone that goes 25k <br>before removing all that dirty oil is leaning too heavily on the side of false economy. just a view not <br>facts

Oil Specs
Mitsubishi
Replies 20 Post by greg h

I LIVE IN CONNECTICUT AND PLAN ON BUYING A B2710 WITH A FRONT END LOADER AND AG TIRES.I SEE CURTIS MAKES A LOADER BLADE THAT YOU CAN PUT ON IN PLACE OF THE BUCKET. HOW WELL DO THESE WORK? I HAVE A 750' GRAVEL DRIVEWAY. DOES A REAR BLADE WORK BETTER? ANY THOUGHTS WOULD BE HELPFUL.

PUSHING SNOW
Snowblowers / Snow Plows
Replies 3 Post by FRED

I am thinking of getting a front end loader for my dad's Long 360. It is a 2wd with power steering. It has remote hydralics out the back. I have a couple of questions: Are loaders a

Front end loader
Long
Replies 3 Post by Stanley Gibson

When I got home the other day my dad had already built a

fuel problems
Long
Replies 7 Post by Stanley Gibson

Couldn't agree more with Roger L,<br>I would use the loader for a year or so, before thinking about a snowblower.<br>Obviously,a loader may not be as good as a snowblower, but is it worth the <br>extra money? Not to mention the extra space and Maintainance required. I would <br>also recommend using the Lighter grade oil, as specified in your manual. <br>15-40 might be a little heavy for the long cold nights of Minnesota. As far as<br>a block heater, if you need it first thing in the morning, plug it into a heavy <br>duty timer, rather than leaving it on all night. Secondly, buy winterized <br>Diesel fuel, or blend it with Kero.(If necessary, down to a 60/40 ratio,or so I've been told).<br>Never had to blend fuel here in Eastern.PA. The winterized fuel works fine.<br>You'll never look back at a gasoline engine, after seeing the performance and<br>fuel economy of a Diesel:)

Winter Use and Startup
Snowblowers / Snow Plows
Replies 7 Post by MichaelSnyder

Were are you located? and how much for the JD755 Mid mount and what size.<br>Ray

many mid-mowers amp other attach Kubota amp JD for sale
Mowers Field and Finish
Replies 8 Post by Ray

Good Point!<br>I use clean motor oil, as spec'd in the manual. Not as convenient as a spray,<br>but very in-expensive, with no threat of deterioration. Adding to that, I had <br>a special chain spray/lube that was real good at pitting my aluminum wheels on my<br>Quad, I would assume it could do the same to paint.

Hyrdostatic drive pedal is heavy - requires heavy foot pressure to mai
Mitsubishi
Replies 8 Post by MichaelSnyder

The YM276 does not have live pto, but can be operated like it has one. The transmission can be shifted without clutching. The gears are shifted by hydraulically activated clutches.

Yanmar 276D price help
Yanmar Tractors
Replies 5 Post by lsheaffer

Please send me some prices on the following tractors. Thank you.

price on kubota m-110 m-9000 3180
Kubota Tractors
Replies 2 Post by David Bryan

The left pedal is a clutch. You must engage it to turn the PTO on and when switching ranges on the transmission. For normal operation in a single speed range without the PTO, you never use it. Well you do actually have to push the clutch in to start the thing....

NH Controls Question
New Holland Tractors
Replies 4 Post by Les Kent

Darned if I know! I'm not sure that they divide their line into compact vs<br>full size tractors. Like the US marketing and manufacturing people do. The<br>tractors just keep getting larger through the range, but have similar features.<br>There is a 35 HP for sale now in Wyoming. A guy in SC was selling a late model<br>grey market 40 something HP recently. This Spring I talked on the phone to a<br>well known grey market importer down South who said that he had imported Yanmars<br>that were close to 100 HP.<br> The largest compact they made when they were importing to the US was the <br>336D. I believe the last year was 1989. This was 33 HP 3 cyl. 12 speed forward,<br>4 reverse power shift with creeper gears. Power steering was integral, not an<br>add on. It had draft and position control on the three point. It had a nice <br>little factory loader with breakout force of 2880 lbs + a 12% reserve.<br> Roger L <br>

John Deere and Yanmar diesels
Yanmar Tractors
Replies 5 Post by Roger L.

To the best of my knowledge, these tractors are made by the DAEDONG INDUSTRIAL<br>CO. of Seoul , Korea, following a joint venture arrangement with Kubota. They are probably an older Kubota design, and many of the kubota parts fit straight in.Theoretically the quality should be the same as Kubota.<br>We have experience with Daedong engines in Australia and generally had good results. Quality control at factory level has been a bit pathchy, with bolts<br>left loose, metal in injectors and other minor problems occuring over the past 5 years. I think with care and common sense, they should perform pretty reliably

Kioti tractorsLB1914 LB2214
Kioti Tractors
Replies 18 Post by Bill Koncz

Hey Bob,<br>look @ KING KUTTER. all I-beam framed, heavy duty tail wheel & stump jumper standard. Out weighs anything in its class. largest selection of sizes. Excellent price and parts support. I think woods cutters are overrated,<br>underbuilt, and overpriced. your paying for thr name & a pretty package.<br>compare the steel in the mowers & the weights.

rotary cutters
Mowers Field and Finish
Replies 14 Post by Jim

Hey Jason,<br>I am a KING KUTTER factory distributor. You received the wrong info on the Disc.<br>We offer a lighter angle disc as well as a heavy box tubing frame disc w/ over<br>20 sizes & configurations available. as for rotary cutters, we have the largest selection of models and the best built in its price catergory. Jim

King Kutter Implements
Operating and Attachments
Replies 6 Post by Jim

Friend of mine has a Ford 1720 and wants to be able to change tires with rims from ag to turf. Dealer rims are pricey, anyone have a source of less expensive rims in upstate N.Y. or by mailorder. Appretiation in advance. Bo

Wheels-rims for ford 1720
Operating and Attachments
Replies 2 Post by bo