Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Either plug on top of the trans. will do for filling. I use the one closest to the shifter as it seems easy to get to for me.

fill points on long 310 for trans and hydraulic system
Long
Replies 10 Post by Carolinablue

mine did the same thing, the accelerator cable broke at the throttle body on the intake

No response to gas peddle
Utility Vehicles UTV/ATV
Replies 3 Post by dginter

Paul,

I found a valve for you at Surplus Center. I'm sure this is what you'll need. See the link below.

Specs on this valve show port sizes of SAE 8. These are listed in 1/16" increments, meaning that an SAE 8 is 8/16", or 1/2" in size. (SAE 12 would be 12/16", or 3/4".) If your ports are 1/2", then this is the valve for you.

Hope this helps.

Joel

loader control valve parts
Cub Cadet
Replies 10 Post by candoarms

Ok.. Ill give those a shot.. thanks for the input

JD 4310 not turning over
John Deere Tractors
Replies 10 Post by roarke88

That is just like the old Kubota L-series chassis and uses the dry brakes system on them and they can rust up if not used on the shafts that they are supposed to slide on.

Kioti LB1914 feels like brake is on Will not drift
Kioti Tractors
Replies 4 Post by Art White

My B6000 injector pump is leaking badly, so I'm ordering a new one. I would appreciate hearing from anyone that can tell me things to look out for when I remove the old one. I won't to be able to install the new one without creating a whole bunch of new issues. Not planning to remove the OEM shim under the pump, so timing should remain okay. Just wondering if there is anything else to watch out for. Thanks

Kubota B6000 How to replace injector pump
Kubota Tractors
Replies 1 Post by vettman

Murf I wonder if the can not wait attitude is world wide or just in the western world. It creates major debt and in turn stress and family and company failures.

Got something to tell them, God demands patience and is not up for being ordered around. I wonder if some of such as the floods our state faced was due to our sins as a people.

I did chuckle at the clean up order.

Winter Storm
Everything and Anything
Replies 14 Post by kthompson

Hard to see a crop with profit to it for us next year at current prices. Yields have been over all good and markets are soft with China I think leading the way. It is hard to understand how buying for food varies as much as it can. Ethanol has had a nonfood impact on corn and some other grains and now with the oil price down it has pushed corn down and thus other grains is what I understand. Odd, not aware of input cost dropping nor building material or such dropping. Maybe the trucking and logging industry is making better profits. Have a friend who is a smaller hay grower and he has told me I can clear more with hay than can gross with soybeans. Then I talk with bigger hay grower also a friend and he was not near as positive.

Growing up we did not worry about grain market prices and I assume they varied but doubt as much as since it is really global as we feed our grain to animals which we did sell some cows but by far more hogs. Of course that was before the big boys go into the hog business.

With our flooding and loss of a vast amount of most any kind of crops this year fully expect there to farmers who do not make it. Crop insurance sure will not save them, may keep from deeper debt but will not provide for their full loss.

Water water everywhere
Everything and Anything
Replies 3 Post by kthompson

I used a relay that has a normally closed position and wired the glow plugs to this circuit. When I turn the key to the on position the glow plugs get power ant the orange light comes on. When the light goes out I turn the key to start and I ran a wire from the start position terminal on the ignition switch to the new relay which switches it to the open position which guarantees no power can get to the glow plugs except when it needs to be going to them in the heat step.

Cub Cadet 7200 Glow Plugs Burn Out
Cub Cadet
Replies 23 Post by seancw

Thank you for your help.

John Deere 3520 Hydraulic Problems Moves Slow
John Deere Tractors
Replies 7 Post by wrankin

All of the candidates are either bought or the Billionaire multi level marketer Trump wants to own or buy you out. None of the GOP is sadly much to get excited about.

It is sad state of affairs when the candidates in the GOP and Democratic parties are what they are!

GOP Debate Senators Part of the Problem
Everything and Anything
Replies 3 Post by joyce1

Anyone have a blow out diagram of a 3 cylinder injection pump? <br>
Having an issue with mine dumping fuel into the oil reservoir. <br>
I have it apart and believe i found the issue, but want to confirm. <br>
Thanks, joe

injection pump diagram 395 engine
Jinma Farmpro Agracat Nortrac
Replies 1 Post by nscrnt88

Just the hand pump. It should be pumping fuel while cranking, not just when you work the manual lever. I wonder if the actuating lever on the back side may have broken, fallen off, maybe a pin worked out, who knows? Worth looking at.

got an older 300 belarus no fuel to secondary filter
Belarus
Replies 6 Post by Imfedup

Hello i'm a new member and i hae a problem with my cub cadet 7235. The front stub axles are popping the snap rings off and are coming out of the housings. I talked to the mechanic at the dealership and he said to replace the bearings and i did but they are still coming out. Could iit be the bearings in the short shaft that drives the the stub axle or could the shims {parts list call them liners] need adjusted, if so what are the specs on adjusting them? thanks in advace for any help.Any help

cub cadet 7235 front axle
Cub Cadet
Replies 1 Post by rolindy

46Bugs, not sure that is best way to advertise the parts you are trying to sell. I really am not sure how is the proper way, send private message to Dennis CTB and he can help.

Engine would not stop
Utility Vehicles UTV/ATV
Replies 4 Post by kthompson

No idea where on your tractor but look for large plug near the bottom of the sides or on the bottom of the transmission or rear end if they use the same sump.

Mitsubishi hydraulic screen
Mitsubishi
Replies 2 Post by kthompson

Well took the test. I was rather pleased with my results. Did very well on those things I felt should know but as to reading symbols bombed. However I got I think four copies of the test results back. Was that their way of telling me to study??

Hydraulics Take the quiz
Tractor Projects
Replies 9 Post by kthompson

Do not skip the simple things like, poor battery cable connection. Also your jumper cables could be failing. It will take a lot less amps to power those glow plugs than the starter.

Jumpstart tc26da
New Holland Tractors
Replies 4 Post by kthompson

Murf has posted a new photo.

Subject: Got snow?.

Description: <br>For when I feel pushy.

Got snow - New Pix by Murf
Photos
Replies 1 Post by Murf

Thanks Murf! I may just look at a little better vent system, sounds like a good idea.

Leak Around Shifter
Shibaura
Replies 8 Post by 612Rob