Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Does any one have any experience switching the backhoe and 60" belly mower on a TC33D? I've got both and was wondering how much of a pain it's going to be to make the switch every two weeks or so.I think all the hardware needs to be removed in order to install the sub frame. Any insight would be appreciated.Thanks.Vincent Ronga<br>"

Backhoe Belly mower
John Deere Tractors
Replies 1 Post by Vincent Ronga

Not sure what model Bush hog, I know its bushhog as thats on a stamped plate bolted to the gearbox, but the thing has been repaired and repainted, I will look for a model. Its a heavy duty sucker, at least 10ga steel and a 4 place adjustable rear wheel.

I got a Bondioli&Pavesi (metric)driveshaft from central tractor with a 75hp rating that I might need to clip 1-2 inches off of. Now if bush hog is using metrics, there is no shear pin in the shaft itself, as u know the waltersheids are round with 2 protrubing ends, the bondioli are tri corner - hence there can be no slippage.

I suppose I COULD weld a tubular shaft near an end (inner/outer) with a pin, but it will no longer fit inside the cover. My other option is to use a limiter.

However, when I was at my cub dealer he said he had never seen an implement with a splined shaft, yet every implement I have seen anywhere else (king, woods bush etc) use splined ends on the mowers, tillers, post holers etc.

There seems to be no standardization as well as support available. A few friends at work are new to tractors also (8n and 861), using the same implements and there seems to be very little places to go. Over the last 3-4 days I searched every catalog, every website and went to a number of stores just to learn what the shaft sizes were and ratings and what parts etc are available. what we need out there is a FAQ with technical data in it (hint hint) becasue when you goto the stores asking questions they look at you askance like it is some sort of private club and the info is not given out...

(In my own case I got my 98 cub in 99 with no manual - they claimed to have mailed it, last weekend when asking questions about the hydraulic circuits the guy actually told me it was common thinking as to how it worked. Mebbe to someone selling them for 25 years...)

Bush hog driveshaft
Mowers Field and Finish
Replies 5 Post by Ed

...I’m getting ready to purchase my first tractor (probably a TC40D or 45D). So far I’ve been to two NH dealers, and I’ve been amazed at how much higher their initial quotes have been than some of the prices I’ve seen on this message board. For example, I was first quoted $28,920 for a TC45D w. SuperSteer and 17LA Loader w. 72” HD Bucket. The dealer then promptly brought the price down to $25,900 in an obvious effort to make me think he was giving me a good deal. But I’ve seen a price on this site of $22,550 for a TC45D with the same setup. That’s over three grand less! At another dealer, I was quoted a price of $20,500 for a TC33D with SuperSteer and loader while there are numerous examples on this message board of quotes $3000 and even $4000 less! . Is this typical for tractor dealers everywhere? (I live in SE PA). Anyway I’m glad I found this site; it looks like it might save me lots of $$$. I just wish that there were more examples of prices for the TC40D and 45D models so I can stand on firmer ground when I’m ready to seriously bargain with dealers. If anyone has received some good price quotes on these models lately, I’d really appreciate it if you would let me know. Also, are there any other web sites besides tractorbynet.com that have price info on the bigger Boomers? Thanks in advance for your help.Jan <br>

Any more prices on TC40D TC45D
New Holland Tractors
Replies 5 Post by Philip J. Nagel

I have built two a wooden frames and put metal caster wheels under them. I can drop my rear blade on one and my 5'rotory cutter on the other. Sure makes it easy to hook up to 3pt. Also, lets me move them out of the way in my garage. May be able to do the same thing for your attachments.

3 Point Attachments Installation Woes
Tractor Projects
Replies 16 Post by djholm

Al, a lot has been posted on this, and I think it all boils down to the dealer. Mine REPLACED THE TRACTOR! I have a 4400, with no belly mower (rear mounted Woods bush hog, R4 tires, etc. Ask your dealer to give you the name and number of the factory rep who calls on him, or ask him to confront the rep himself. It's like a lot of warranty -- if they don't hear anything, they don't solicit -- but JD IS fixing the problem. (At least, a lot of posts on this board indicate so.) I will say though, that my dealer sold 35 with the old style, and only had 2 replacements! So, be persistent! If he's entitled to have a dealership, he should fix any problem you have. Good luck!

Old Style Axle Update
John Deere Tractors
Replies 10 Post by Jack D

Tom, they're all 3 nice tractors; definitely not too much. I have a B2710 and my cousin has the TC29D, and I don't guess either of us would trade with the other. Drive them and see which on suits you best. And I can't imagine you buying one without a front end loader; I think you'd quickly find that to be one of the most used pieces of equipment. I don't have a backhoe, but you might want to read some of the other messages on this and other forums. Very handy tool, but the 3-point backhoes vs. subframe is something you need to look into.

NH vs Kubota
Operating and Attachments
Replies 16 Post by Bird Senter

I'm not sure how this is a fair comparison. In terms of fitting a wide range of implements, I think the 8N wins. The 4100 is narrow, which means your available space to fit 3pt hook-ups is narrow as well. I've run into this problem when using old implements. As far as traction, 4100 wins by a slim margin. 4wd's traction advantage goes without saying, but you have to have the HP to match. The 8N properly weighted could probably outpull the 4100. The only real advantage of "handling" implements in 4wd is (1). 4wd by nature is heavier in the front than a 2wd. (2). 4wd ties your front and rear wheels to the rear brakes. This provides an obvious braking advantage on wet hills, etc.. over 2wd alone. If you consider traction as part of handling, then yes to that as well.
Although I haven't pulled a one bottom with my 4100, I think it could do it, but don't be surprised if you need to make two passes to sink the shear deep.

Older 8N vs JD4100
John Deere Tractors
Replies 5 Post by MichaelSnyder

Let me say this about parts, I had to scrounge what I will call a couple of hard parts for this tractor. A pto shaft and a pto countershaft. It is a long story as to what happened, but it was not the fault of the tractor. Anyway, purchased the pto shaft through the dealer but for the pto shaft the dealer wanted a $1,000.00. After I picked myself up and dusted myself off, I contacted some of the grey dealers and ordered the part direct from Japan at $50.00 including shipping. So parts are available, but not always easy to locate.

Jerri

PS Remember mine is the grey market Hinomoto

Researching a MF 1030
Massey Ferguson Tractors
Replies 13 Post by Jerri Neese

I'd agree with Dave. If you already had a 6' cutter, and the weight was OK for the 3ph, it probably would work for light mowing (using a grade of shear pin appropriate for the 1510's PTO). However, I sure wouldn't go out and buy a 6' cutter for a 20 PTO HP machine. It just means that one type of work can be done fast, but heavier work can't be done at all.

The 3ph capacity for my 1710 is over 1800 lbs. I think the 1510 has a lighter 3ph, but the weight of most implements shouldn't be a problem. Good question for a dealer though.

Can a 1510 pull it
Operating and Attachments
Replies 4 Post by TomG

I paid almost that much for my TC29D w/o SS !!!!! I'd say it's a great price!

NH 35D Price
New Holland Tractors
Replies 8 Post by Dusty

Thanks. Guess that's the distinction I didn't know. 8N's have a 3ph but not a Cat 1 3ph. Sounds like many Cat 1 implements might work with a little adaptation, especially if the lower link pins are replaceable.

which used tractor to buy
Operating and Attachments
Replies 5 Post by TomG

I have had my new Kubota 2910 for about a week and a half now and I couldn't be happier with my choice!I own 10 acres and will primarily use it for mowing and tending our hobby farm. I have so far done mowing, some landscaping and loader work with the tractor and it is the perfect size for my use.I saw some posts here to always get the bigger tractor if you are able but so far I would have to disagree with that philosophy. I could have afforded a bigger tractor, but if I had gotten one I couldn't do some of the things a smaller tractor can do. Not to mention the fact that driving a large tractor over one's lawn is probably not a great idea either. The 2910 is a great size for a small hobby farm and is really a nice machine!

My New Kubota 2910 - Perfect Size
Kubota Tractors
Replies 1 Post by Elkoboy

I just recently received my Kubota 2910 with 72 inch mid-mount mower deck and R4 tires. A large part of my decision to go with the Kubota was because of its weight - it's 700 pounds or so lighter than the TC29/TC33 and the tractor was going to be on the lawn once a week mowing and I didn't want to run the risk of doing a lot of damage to it.

I chose the R4 tires as they seemed to be the most versatile choice for doing both mower and loader work. As far as any damage to the lawn I mowed last week after a day of dry weather (it had been raining off and on for about a week) and the only damage I did was when turning very sharply (don't do this) and I don't know that turf tires will eliminate this effect completely either. I did get a loaner 2150 from the dealer with turf tires on it for a week before I got my 2910, so I got a chance to see them in action also. Turf tires are definitely easier on your lawn than R4's, but you will sacrifice some traction elsewhere, as well as some sidewall rigidity when doing loader work. The turfs also give a bouncier ride IMO but are definitely the way to go if you're going to be working on turf most of the time.

I also debated at length about the 60 inch versus the 72 inch deck for the very reason you mentioned - manuverability. My final choice was to get the bigger deck as my intention was to reduce my mowing time as much as possible. I am glad I got the bigger deck although if you have a lot of obstacles to mow around and/or between, you might consider the smaller deck. I cut my mowing time from 3 plus hours with a 42 inch deck to less than 1 hour with the new tractor!

Side or Read Discharge R4 or Turf Mowing Time Price
New Holland Tractors
Replies 8 Post by Elkoboy

2000-06-06

We have a good 600 twisty up and down feet to trench now for 4 inch conduit and more later. I am about to replace our current 1720 Ford with a 32 speed utility model (min speed about 1/4 mph, 80 PTO hp). A SSL attachment plate for the loader is my goal, for the versatility it offers.

Any thoughts on whether that setup would work with a trencher, folks?

Thanks in advance,
Jim

3 point trencher
Operating and Attachments
Replies 8 Post by Jim Hardwick

Did you just buy the plans or did you get a kit from Metco Supply? How long to build? Does it seem to put a lot of pressure on the 3pt hitch? I'm asking because I have seen the castings on other tractors crack - but not due to a back hoe attachment. The pictures on their web site look good and the price is certainly right - compared to units at the Kubota dealer. These units also look similar to the units available from Northern Equipment (N. Hydraulics). Any advice and hints would be appreciated. Thanks.

CadPlans
Loaders Back Hoes
Replies 5 Post by Richard Harburn

Thanks for everyone's input. As my friend's father, who was a Gas Company man all his life, used to say "Now! we're cooking with gas".

Loader down force
Loaders Back Hoes
Replies 15 Post by Eric Edwards

Mark you were talking about a farm equipment guide blue book. where can I get one?

JOHN DEERE 950
John Deere Tractors
Replies 5 Post by Michael J. Mentes

Jerry, thanks for the info on the 1217 backhoe. I bought my tractor online from tractorsmart.com. I am looking at a used 1210 with a mowing deck for 9,0000. The models have changed abit since the 1210 and I was wondering if it was a fair price?

MF 1240
Massey Ferguson Tractors
Replies 14 Post by Martin

HI JIM! I GOT YOUR E-MAIL ABOUT A 5' BELLY MOWER FOR A JD 855 (1995).THIS WAS BACK IN LATE MARCH.I WAS WONDERING IF YOU HAD ANY LEFT? WHAT CONDITIONARE THEY IN & WHERE ARE YOU LOCATED.ALSO WHAT PRICES ARE WE LOOKING AT? THANKS JIM. JEFF IN NEW JERSEY. E-MAIL ADDRESS-JJJ66_99@YAHOO.COM.

Kub JD mid-mowers 4 sale
Mowers Field and Finish
Replies 6 Post by JEFF

Hi Frank; What are looking to spend? I am selling a JD 755 with attachments. See my post, the photo link and post is at the top of the next page of post on this forum.

David

Looking for a Compact diesel to mow 9 acres
Operating and Attachments
Replies 7 Post by dsg