Go Bottom

coleman powermate 1600

View my Photos
rescue2
Join Date: Jan 2004
Posts: 3 Georgetown,SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-01-20          74601


Is there anyone who can tell me how to flash a generator to restore a generator so it will work, everything checks out to be good the windings, the amature,the capacitors,
diode's but only 4v ac and 1v dc,i was told ther was a way to restore the manetism to the unit by flashing, but the process was not explained to me, need help have to units and both have same problem,and everything in both units check the same,but can't find anything wrong.




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



coleman powermate 1600

View my Photos
Chief
Join Date: Jul 2003
Posts: 4297 Southwest MiddleTennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-01-20          74603


Flash away! ....


Link:   How to "flash" a generator when output is lost due to loss of excitati

 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



coleman powermate 1600

View my Photos
AC5ZO
Join Date: Jul 2003
Posts: 928 Rio Rancho, NM 87144
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-01-21          74625


No generator will completely contain the magnetic field within the generator casing. It only takes a little residual magnetism to get the generation process started. The previous link is correct in all ways, but I would be tempted to try a strong permanent magnet attached to one side of the generator housing during a startup to see if that would cause enough field imbalance to start the generation process. It is much easier to do and cost virtually nothing. You can remove the magnet if the generator comes back to life.

After the generator will start to generate a magnetic field, it will excite the generator into operation. The generator was probably neutralized by one or more overloads that caused the AC fields to collapse. This is a secondary safety factor beyond the circuit breakers. If this happens again, I would consider getting a larger generator unit. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



coleman powermate 1600

View my Photos
rescue2
Join Date: Jan 2004
Posts: 3 Georgetown,SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-01-22          74765


Thanks for the help, found out today how to flash the unit by 110 ac source,took only five minute after you build the exciter, gen. now working, only ran unit for about 2 minutes this morning and this afternoon it would not work again, then i did the process again and ran the unit for about five minutes and its still holding, will try again tommorrow to see if it retained its charge. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login