Go BottomAdvice on correct Plow for 4WD 4310 Tractor
 | Don
Join Date: Posts: 1 
|
2003-05-17 55049
What is the correct size plow for this tractor?
I was thinking of purchasing a (2) bottom 14" plow.
Reply to |
Quote Reply |
Add PhotoAdvice on correct Plow for 4WD 4310 Tractor
| Heretic
Join Date: Posts: 1
|
2003-05-17 55059
Do you have a gear transmission? Do you have ag tires on rear? If yes to both, I suspect you could pull the 2-14 bottom plow. If not, I wouldn't care to guess. The R-4's would likely be too wide to fit into the furrow made be the 14" bottom. The HST might not give you enough umpph in HP.
Hope you find a better answer on here. ....
Reply to |
Quote Reply |
Add PhotoAdvice on correct Plow for 4WD 4310 Tractor
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York 
 Pics
|
2003-05-19 55094
Youu should be fine using a two bottom even in heavy clay with that size tractor. As mentioned you might need to go to a 16" bottom with industrial tires. Remember if you do have a hydro to get into low range in hard soil or at least medium range. You should be working at near full throttle to have the hydro at it's best for pulling work. ....
Reply to |
Quote Reply |
Add PhotoAdvice on correct Plow for 4WD 4310 Tractor
| Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2003-05-19 55095
Youu should be fine using a two bottom even in heavy clay with that size tractor. As mentioned you might need to go to a 16" bottom with industrial tires. Remember if you do have a hydro to get into low range in hard soil or at least medium range. You should be working at near full throttle to have the hydro at it's best for pulling work. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This