Go Bottom

TL100A New Holland - Clutch Spring Question

View my Photos
Prichards
Join Date: Oct 2022
Posts: 1 Murchison, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-10-01          201347


While shredding with my TL100A New Holland, clutch feel changed, not a smooth push and some creaking sounds while depressing pedal. Inspected underside linkage (left side, of trans by fuel tank). There’s a coil spring, about 3.5 inches long w/ hooks on both ends, hanging loose on 1 end. Other end is connected to clutch llinkage. Cannot see where the loose end should connect. Can send pic. Any ideas?



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



TL100A New Holland - Clutch Spring Question

View my Photos
Prichards
Join Date: Oct 2022
Posts: 1 Murchison, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-10-01          201348


Looking up from the ground, loose spring on linkage, left side of trans. Can’t determine where the loose end should connect. ....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



TL100A New Holland - Clutch Spring Question

View my Photos
mrozzie
Join Date: Aug 2004
Posts: 3 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-11-21          201394


Hope you figured this out maybe if you have a helper move the pedal you can observe the linkage movement to determine location. Could be welded location sanpped off in the field that can happen, LOL ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login