Go Bottom

MF 1020 no three point

View my Photos
Mf1020prblmchild
Join Date: Feb 2022
Posts: 3 California
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-02-03          200865


I have a Massey Ferguson 1020, 4x4, standard, MF Loader. So I scored this tractor for free in non running condition. Has not run in at least 10 years. Was parked because of bad hydraulic pump. Got it running after going through it, tearing apart injection pump, diagnosing and fixing clogged cooling system, new starter, used hydraulic pump, filters and fluids.

Now that it starts consistently trying to figure out hydraulic problems. Loader hoses are bad. Disconnected and capped at supply and return on relief valve. Pump is moving fluid on high and low pressure side to relief valve. Pulled relief valve and inspected. Still no three point pto engaged or not.

Thinking piston might be stuck in three point assembly. Help. What should I check? Do accessory outlet hoses need to be looped not capped for three point function?

Appreciate any advice.


Ryan




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



MF 1020 no three point

View my Photos
weasel
Join Date: Mar 2004
Posts: 9 north carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-02-25          200899


if loaded is taken out of system,, hoses has to be loop back in system for 3pt to work,,,, I found out the hard way,,lol ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login