TractorPoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors,  Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images
Forums > Active Threads > Lawn and Garden Tractors > Ventrac Lawn Tractors
Post Message Ventrac Lawn Tractors

Messages As Posted --  Go Bottom

Ventrac Lawn Tractors

Steiner 430 max PTO belt installation how to

2014-10-25 20:35:23 191281  treecareco
Hello . I have a steiner 430 max with the Kubota d-722 and my pto belt (engine to double idler pulley) broke . I bought a new one at napa correct size and im having awful time with it. I cant get the pto lever to stay engauged , im having the rod that's got the two equalizing springs coming into contact with the single idler so ive adjusted that but somethings not right and I cant figure it out all day into the night now. What could be wrong?
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo

Steiner 430 max PTO belt installation how to
2014-10-26 00:00:00 191285  minimac | 1 Pix
It is necessary to check the PTO belt adjustment
A. Each time a new attachment is installed.
B. If the PTO drive belt slips or does not release
properly.
1. Attach the new implement using the correct
attachment drive belt. See the Attachment
Operatorís Manual for the correct belt or the belt
chart on page 5-10 in this manual.
2. Stop the engine, engage the PTO lever and check
the distance as shown in above drawing. The
correct distance between the PTO drive belt is
2-1/4 to 2-1/2 inches (1-1/2 to 1-3/4 for Kubota). If
the distance is less than 2-1/4 inches (1-1/2
Kubota) the drive belt may slip. If the distance is
greater than 2-1/2 inches (1-3/4 Kubota) the drive
belt may not release properly when the
attachment is raised to the highest position.
3. Disengage the PTO and adjust the idler slide
assembly by turning the belt release catch handle
clockwise to tighten belt and counter clockwise to
loosen belt. Adjust to obtain the correct
measurement as stated in step 2.
NOTE: If correct measurement is not possible,
check for an improper size drive belt.
4. Start the unit and raise the attachment to full height.
The attachment should not run with PTO
disengaged. If it does, the drive belt adjustment is
too tight. Repeat Steps 1 through 4.
STOP EN
....
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo

Steiner 430 max PTO belt installation how to
2014-10-26 00:00:00 191286  minimac | 1 Pix
Steiner PTO Pulley diagram ....
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo

Picture Link

Steiner 430 max PTO belt installation how to
2018-04-23 00:00:00 197703  lawnboy1955
Where does the spring for the idler pulley hook on the tractor side, I know where it goes on the pulley but not where it attaches to the tractor. ....
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo

Return to index    Go Top


Share This



Tractorpoint Parts
Fast Delivery!
Low Prices
Tractor Radiator for sale
Radiators














Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines