Go Bottom

Massey Fergusen 304 Stalls will not start

View my Photos
sunraycave
Join Date: Jan 2012
Posts: 2 mt vernon mo,
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-01-25          182180


I was backing up and it just died i though it ran out of fuel put more fuel in it will turn over it will not start i put new fuel fillters on it but it will not start i clean air filter just turn over wont start help me if you can.?



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Fergusen 304 Stalls will not start

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2012-02-01          182248


Fuel so diesel. It turns over but will not fire, at all? Any smoke for the exhaust?
Did you try bleeding the system? Have you checked that fuel is getting to the injectors? Have you checked the fuel line to be sure it is even getting out of the tank? Could be trash in tank. Could be two issues you could have run out of fuel and in the backing up somehow tore loose a saftey swtich that is preventing fuel to pump. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Fergusen 304 Stalls will not start

View my Photos
shona13
Join Date: Mar 2012
Posts: 32 Western Australia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-06-30          184097


G,Day sunraycave.
If you have replaced the fuel filters look on top of the filter housing there are bleed screws on top of the fuel filter housing 5/8" a/f spanner fits undo both one half turn and operate the fuel lift pump the one with the lever on the bottom pump till ONLY DIESEL COMES OUT no air toghten the two bolts then go to the fuel injector pump the one with all the pipes on look closely and you will see two Small bleed screws a 5/16 " a/f ring spanner fits ,undo the bottom one first and operate the fuel lift pump again till no air comes out gently retighten and do the top screw the same way .next undo one injector pipe anyone the easiest to get to undo it one half turn push the engine stop in ,set the throttle to fast idle and crank the engine till it starts ,once it starts carefully retighten the pipe connection KEEP HANDS AWAY FROM THE SPRAY.
Happy days.
Hutch ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login