Go BottomWTK pinion shaft orientation for 300D D1650FD D1850D D2050D D2350FD
 | nemein
Join Date: May 2009 Posts: 10 florida 
|
2009-10-31 166637
I am in the process of installing new hubs on a Mitsubishi 4 wheel drive tractor. All of the tractor listed in my subject title use the same or very similar front drives.
My question concerns the pinion shaft that drives the front wheels, part # 69541-61501. The splines on one end have a stop that prevents the gear from moving beyond a point on the shaft. The other end does not have this, the gear can move all the way to the bevel where the splines taper to the shaft toward the middle.
Should the end with the stop on the splines go to the top or to the bottom of the spindle.
I can send pictures if it helps and any help would be greatly appreciated.
Thank you in advance,
Mike
Reply to |
Quote Reply |
Add Photo
Go Top
Share This