Go Bottom

camshaft removal

View my Photos
bushhog
Join Date: Oct 2008
Posts: 8 ky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2009-04-06          161781


Hi again,I have a 1994 Belarus 250A and after being examined by a couple of good mechanics they determined that the camshaft needs to be replaced.Neither of these gentlemen has worked on a Belarus before. My question is what is the best way to break down the tractor to replace the camshaft?I realize this a broad question but any leads as to the sequence of dismantling would be greatly appreciated. Thanks



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



camshaft removal

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2009-04-07          161797



The first thing is to remove the sheet metal, then the front end of the tractor. At this point the front of the engine should be easily accessable to tear apart the engine to remove the camshaft. Be sure to support the front of the tractor properly so it doesn't fall. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login