Go Bottom

2010 hand throttle

View my Photos
countryboy
Join Date: Jan 2006
Posts: 26 central Indiana
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-11-15          157889


hand throttle will not stay where it's positioned anywhere above idle. foot thottle appears to function normally, anyboby know how the hand throttle is held where its put? I have looked at JDparts.com but I'm not clear as to how it works

Thxs countryboy




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



2010 hand throttle

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-11-15          157891


Not sure from your post if it's a yannie or a JD, but on mine the hand throttle holds where set by a "friction disk" or "friction washer." It eventually glazes and loses its hold. Replacement not costly but you may have to remove panels to get at it. Or you could try removing the glaze.

There's also a "return spring" that weakens in time, that you might also want to replace though it's not causing the present problem. Also oil the moving bits but not the disk. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login