Go Bottom611 injectors
 | YUMZ-6M
Join Date: Aug 2008 Posts: 3 Ontario 
|
2008-08-10 155976
I recently aquired an old 610 (same as 611) with the D65M engine and want to remove the injectors but they're seized. The manual says to pry them out after removing the retaining nuts. I've soaked them in MOOVIT for days and managed to pry one out but the others are impossible to move. Anyone have a better idea how to get them out? Thanks.
Reply to |
Quote Reply |
Add Photo611 injectors
 | Chief
Join Date: Jul 2003 Posts: 4297 Southwest MiddleTennessee 
 Pics
|
2008-08-26 156335
Kroil and PB Blaster are pretty good penetrants as well. Try a heat gun and if you can configure it a slide hammer but be careful and don't over do it with the slide hammer. ....
Reply to |
Quote Reply |
Add Photo611 injectors
| YUMZ-6M
Join Date: Aug 2008 Posts: 3 Ontario
|
2008-08-26 156342
thanks, i ended up removing the head and taking it in to have it serviced and pull the injectors at the same time.
Now I'm fighting to get the pistons unsiezed .... :-( ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This