Go Bottom

Loader mounts for MT372 - info needed

View my Photos
Tenn_Blue
Join Date: Jul 2006
Posts: 1 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-11-14          148246


I have a Mitsu MT372. Just picked up a used loader from a friend - couldn't beat the price... Will have to replace some cracked hoses and such, but in good mechanical shape. Only label I can find is "Manufactured for NEDA by Johnson Hydraulic Group." It came off a SATOH tractor, but not sure what model. Quick measure, the loader is about the right scale for my tractor from what I have seen. It comes with a set of mounting brackets, but the mounts don't seem to line up with holes in my tractor - not sure where they are supposed to line up. I realize I may have to fabricate or "adjust" the existing mount to fit my machine - not a problem. BUT, I was looking for some other 372 owners out there who could send me pictures/specs on their loader mount points.
On the loader, the hydraulic hookup is attached to an aluminum plate - looks like it mounts right up to the tractor under the seat to attach to the tractor's hydraulic system. Am I correct on this?
Once I get it cleaned up and unloaded, will put some pictures up. Thanks in advance for the help!




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Loader mounts for MT372 - info needed

View my Photos
BillRodgers
Join Date: Jul 2003
Posts: 66 Roanoke, Va.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-11-14          148272


Send me an email and I can provide some photos that may help. My email address can be found at my web site, satohparts.com. Bill ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login