Go Bottom

Komatsu 6 way blade modifications

View my Photos
D20_dvr
Join Date: Sep 2005
Posts: 2 Perry, GA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-10-04          117372


I'm looking for someone that has modified the blade control valve system on a Komatsu 6 way blade. I've built a 3 point hitch for the back of mine and would like to add an other center block and the linkage kit for the joystick (4 way control) By adding a second center block and reversing the linkage from inside to outside of the push-pull block I can have the left-right function control the front blade push angle. Then the push-pull control would raise and lower the 3 point hitch. I checked with the dealer here in middle GA and the only way to buy the block I need is to buy whole 3 valve assembly ($4300.00) a price of 1/3 of the dozer.
If anyone knows where I can get the manufactures name and part number for the center valve block for the 6 way blade it would make this upgrade much easier.

Thanks

Brian




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Komatsu 6 way blade modifications

View my Photos
D20
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-04-23          128152


We feel your pain & decided to use 2 3way manual valves in the tilt circuit below the floor.
Will hand turn the 2 valves 90 degrees to select front option or rear.
Valves, hoses, connects & labor abt $350.

A Lee, Fl ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login