flail mower experience
daveinnh
Join Date: Feb 2004 Posts: 30 central NH |
2005-08-06 114464
Does anyone have 1st hand experience using a "flail mower"? I bought an International World Agritech 4' rotary mower last year. Our 7 acres of pasture has quite a few rocks and I replaced a few shear bolts. Would the fail mower be a better tool for cutting pasture grass (timothy, clover, sheep fescue, raspberries along edges)?
Reply to | Quote Reply | Add Photo
flail mower experience
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2005-08-07 114471
Not if you have a bunch of rocks. It can get real expensive replacing broken knives. ....
Reply to | Quote Reply | Add Photo
flail mower experience
paulss
Join Date: Nov 2003 Posts: 60 Lavaca County, TX |
2005-08-07 114476
You might put a slip clutch on your cutter, it sure beats having to replace shear bolts. ....
Reply to | Quote Reply | Add Photo
flail mower experience
dsg
Join Date: Jun 1999 Posts: 528 Franklin, Maine Pics |
2005-08-07 114478
I have never used a flail mower, but up here in Maine the Blueberry growers mostly use flail mowers on the fields. Maine blueberry fields are mostly Rocks:)
David ....
Reply to | Quote Reply | Add Photo
flail mower experience
hardwood
Join Date: Dec 2002 Posts: 3583 iowa |
2005-08-07 114479
Flail mowers are probably built lots better than 30 yrs. ago, but I had one from that time and rocks were the biggest problem, I don't remember the brand anymore, but I was broke down more than I was mowing. Best of luck. Frank. ....
Reply to | Quote Reply | Add Photo
flail mower experience
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2005-08-08 114496
We have a couple of Rhino flail mowers that we use for the odd contract we do for cutting rough stuff.
For road-side work ar anything where they may be people, vehicles, animals, etc., in the area they are the only real choice.
In my picture # 20 there is one them on the back of my 'Bota.
They do a very nice job, but like everything else also have their 'pro's & cons' list too.
The big differences are, shorter than a rotary front to back, makes for a shorter load if trailer is crowded, or for manuevering, also makes turning tight corners next to fence lines easier, not so much tail swing, debris can be a PITA, rocks, stumps, etc., are OK but anything like plastic sheets or twine, rope or fence wire will be wrapped around the spinner bar before you know what happened. Carry small bolt cutters, vice grips and gloves with you any time you go cutting.
Flail knives break, until that point they don't really have to be sharpened. A new set can be spendy and take some time & patience to change them. One mine there are 92 pairs of knives to be changed each time.
All in all, unless you have a really big pasture, you might find it easier, and cheaper, to just clear the rocks.
Best of luck. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This