Go Bottom

Long tractor 610 reduction gearbox leak

View my Photos
kpack1957
Join Date: Feb 2019
Posts: 2
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2019-02-09          198188


Morning all I’m getting leaks in several places on my 610.
My main leaks are the reduction gearbox seal or transfer case.

Then I have a couple of leaks at the bottom of my injection pump. I have the rebuild kit for the injection pump and have put orings in the throttle arms at the top of the pump but somethings dripping at the bottom, I’ve got to clean it up and pinpoint just what’s leaking and identify the part from the parts manual.
Has anybody here rebuilt their injection pump or replaced the seal in the reduction gearbox?
Im trying to figure out how to post pictures for breakdown out of parts manual.




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Long tractor 610 reduction gearbox leak

View my Photos
kpack1957
Join Date: Feb 2019
Posts: 2
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2019-02-09          198189


....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Long tractor 610 reduction gearbox leak

View my Photos
kpack1957
Join Date: Feb 2019
Posts: 2
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2019-02-09          198190


....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Long tractor 610 reduction gearbox leak

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-02-26          198969


There is a hole under the clutch housing on my 2510 that has a cotter pin connected to something inside.
If you are running the trans fluid too high it could be comming out of the shaft housing and leaking out that hole.
Also the holes that are threaded under the trans go all the way through to the clutch housing. Then you may have the hydraulic pick up tube bolt leaking. The bolt is suposed to have a rubber ring to prevent that, on mine it was brittle. I put 2 o rings on it. Be careful tightening that bolt, it is really easy to strip. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login