Hydraulics Won t Work
victory51
Join Date: Apr 2016 Posts: 4 New Mexico |
2017-10-07 197167
My 1500D Yanmar hydraulics just stopped working. It was leaking fluid before by the starter and then all of sudden the hydraulics just stopped working altogether. Would this be a hydraulic pump problem? Did a seal bust because it's leaking fluid on the bottom of the case. Any help will do. Thanks.
Reply to | Quote Reply | Add Photo
Hydraulics Won t Work
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2017-10-07 197168
Was it leaking from the suction line? It could be sucking air ....
Reply to | Quote Reply | Add Photo
Hydraulics Won t Work
oldchevy1
Join Date: Aug 2013 Posts: 5 El Paso |
2017-10-07 197169
I have a JD 650 which I believe is a rebranded Yanmar. I have had air get into my hydraulic lines because I have a whole somewhere in one of the lines. Anyway, sometimes when I park my tractor for a while and then start it up, the hydraulic activited devices will not work. I end up having to bleed the air out of the lines by loosening the big nut on top the hydraulic unit that sits just under the seat. With the tractor running, I loosen that nut with a breaker bar and right size metric socket. You can hear the air escaping then suddenly with a sputter it will spit out a mixture of air and hydraulic fluid. I quickly tighten the nut after the fluid starts flowing out. I have learned to pack the area surrounding the nut with mechanic rags to catch the spray. I also put a catch basin under the tractor directly under the seat. It will make a huge mess, but it will allow me to operate the hydraulics. When I mean spray, it sprays everywhere. Use old clothes and eye protection. I have started replacing hydraulic lines trying to fix the problem with air getting into my system. ....
Reply to | Quote Reply | Add Photo
Hydraulics Won t Work
victory51
Join Date: Apr 2016 Posts: 4 New Mexico |
2017-10-07 197173
Quote:
|
Reply to | Quote Reply | Add Photo
Hydraulics Won t Work
victory51
Join Date: Apr 2016 Posts: 4 New Mexico |
2017-10-07 197174
Quote:
|
Thanks that might be it because I did loosen that fitting when I replaced a seal in the front of the transmission. I will try that and see if that will fix it. Thanks. ....
Reply to | Quote Reply | Add Photo
Hydraulics Won t Work
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2017-10-08 197175
If there is a hose on the suction line that is where I would look first. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This