Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I adjusted my 4700 to the 2nd narrowest setting (so that tire chains clear) and it is about 75 inches wide.

JD 4710 width
John Deere Tractors
Replies 3 Post by tk_csa

I believe according to the ASAE (American Society of Agricultural Engineers) the only limitation of the cat1 hitch is height (max lift height). I believe you'll find this somewhere in 2210 literature (sales or manuals) or on the web.

Limited cat 1 3PH
John Deere Tractors
Replies 13 Post by tk_csa

I still remeber the first time I tried to re-mount my 210 loader. Had the misfortune of trying to do it at night. I was pissed! by the time I finished. Then I found "the trick". When remounting, raise the hydraulics until the front wheels are 6" off the ground, then carefully plant both feet on the black loader mounting plate on the front end of the tractor and bounce as necessary to re-engage. I've never had a problem since. Obviously the tractor is a little light to do it unnassisted.

2210 FEL Attach and Removal Info
John Deere Tractors
Replies 5 Post by tk_csa

I have a JD 4700 and set up aux lights on the ROPS. VERY handy. Recently bought a JD2210 and yes, the loader makes the headlights just about useless. This is what I did; ordered two brush guards for the ROPS turn sigs/marker. Same parts as for the 4700 (dealer found no listing for guards for a 2210) Mounted a pair of JD work lights on the brush guards as designed. Took two generic work lights and mounted them on a small plate then attached the plate to the ROPS using the predrilled umbrella holes. YES, 4 lamps WILL overload the worklight circuit and pop the fuse, soon if not immediately. Simple solution; wire the lamps all the way up to the battery compartment. Get a Bosch or P&B 12v relay and connect the battery to the lamps (through the relay, and of course fuse the connection), tap the headlight wire to use as a relay trigger. Aux lights come on with headlights and no blown fuses!
toolcrib"at"collegesuppliers.com)

lights for my 2210
Operating and Attachments
Replies 7 Post by tk_csa