Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Yes I know, was just letting the young man in the 1st. post that he could do it.

Kubota BX2230 Mower deck lock up
Kubota Tractors
Replies 5 Post by leejohn

You could have a relief valve part way open or bad. Run the cyls. all the way out and put into full relief see if it well clean it and make sure you hear it go into relief. Pump should load and engine speed may drop a little.
Could have a pin hole in the pump intake hose and sucking air.
Check all fittings make sure the holes in each one is big enough.
Maybe later you can get it plumped right and not use the remotes for your in and out on the loader valve.
If all this is OK then I would check pump flow.

hydraulic pump
Other Tractor Brands
Replies 14 Post by leejohn

The dynamo has a Ohms test on the stator, but I couldn't find it. Take the belt off and make sure it turns easy and no side or in and out play in the pully. I'm not sure but the reg. could also have a ohms test.

Kubota B8200 Dynamo Alternator tests
Kubota Tractors
Replies 4 Post by leejohn

On some of those old carbs. the throttle plates when open all the way can hang up on the intake. Make sure it is in the middle of the intake. When taking the 2 mounting bolts loose you might see if throttle plate shaft turns any.

MF135 Zenith Carburetor Problems and adjustment
Massey Ferguson Tractors
Replies 11 Post by leejohn

It's the stop solenoid. Made sure you have 12 volts to it. You should be able to hear it chick open and off and also feel it if you hange on to it while turning the key off and on.

B2150 Won t Shut Off With The Key
Kubota Tractors
Replies 5 Post by leejohn

Sounds like ujoints too me.

JD 855 - 60 MMMower Vibration Problems
John Deere Tractors
Replies 15 Post by leejohn

It sounds like to me you are trying to pickup the hole pile and you can't do that. Try pulling the top down, it well be nice and loose and you can pick it up at high idle. Less ware on you tractor and it's easy to fill the bucket with no tire spin. I don't think there is anything wrong with your tractor.

Kubota B2150 Tractor Loader dropping on one side
Kubota Tractors
Replies 13 Post by leejohn

Don't you just hate it when you go to all the work and you can't at least get a "Hay I got it...Thanks"

John Deere JD 4100 Wiring diagram
John Deere Tractors
Replies 32 Post by leejohn

what about the load check valve would that also do that or would the load just drop?

loader control valve problem
Loaders Back Hoes
Replies 4 Post by leejohn

John did you get your 950 wired up? Lee

Need wiring harness for JD 950
John Deere Tractors
Replies 21 Post by leejohn

leejohn has posted a new photo.

Subject: 2nd Tractor.

Description: <br>My 2nd tractor, 1st was a Ford 8N

2nd Tractor - New Pix by leejohn
Photos
Replies 1 Post by leejohn

leejohn has posted a new photo.

Subject: B7800 Remote Valves.

Description: <br>The way I mounted My Remote Valves.

B7800 Remote Valves - New Pix by leejohn
Photos
Replies 1 Post by leejohn

leejohn has posted a new photo.

Subject: B7800 Remote Valves.

Description: <br>The way I mounted My Remote Valves.

B7800 Remote Valves - New Pix by leejohn
Photos
Replies 1 Post by leejohn

leejohn has posted a new photo.

Subject: B7800 Remote Valves.

Description: <br>The way I mounted My Remote Valves.

B7800 Remote Valves - New Pix by leejohn
Photos
Replies 1 Post by leejohn

leejohn has posted a new photo.

Subject: B7800 Remote Valves.

Description: <br>The way I mounted My Remote Valves.

B7800 Remote Valves - New Pix by leejohn
Photos
Replies 1 Post by leejohn

The only way the arm well hit the other pins if the top link would brake or if you have a real long top link. If it does brake I don't know if you could go high enough for them to hit? I would of put the cat. 2 on the outside and the cat 1 facing in. I put two cat. 1 on mine because I have a B7800 and L4240. The B7800 wouldn't lift it high enough I did drill another hole down for the top link about 2" I Forgot that in my frist post.
Lee

Land Pride LR1560 Rake lift height on Kubota BX23
Operating and Attachments
Replies 13 Post by leejohn

For the guys that have no clearance with the R4 tires. You might want to do this, its real easy and saves $$$ too.<br>
I was going to make some spacers but after looking at the flange of the front hub I didn't think it could handle the longer studs. The flange is right around 1/4" and sure wouldn't want to brake the hub. Tried turning the wheels around by switching from side to side, I didn't like that to much because it made my steering seem loose.<br>
What I ended up doing was to grind the inside of wheel out. Moved it in 1 1/4" and rewelded. The 1 1/4" put the inside bolt flange in the center of the tire. There is about 1 1/2" clearance between the tire and the steering bracket. Worked out real good!!<br>
I'm also a member on another site and I'm going copy and paste this over there.<br>
<br>
Lee

Kubota B7800 R4 Front Tires Clearance
Kubota Tractors
Replies 1 Post by leejohn

Good Ideal I'll do that. Lee

Kubota B7800 coolant temps
Kubota Tractors
Replies 29 Post by leejohn

I just put a new picture in my photo album and I don't know how to move it here, would some please move it for me.<br>
I know you would like to see this one.<br>
<br>
Lee<br>
<br>
<br>
Edited by Murf to include photograph.

Deer 4 Legged
Just For Fun Off Topic
Replies 1 Post by leejohn

I just happened to look at Just For Fun / Off Topic for the 1st time and seen my picture of the Poor Man's Pole Saw. What a shock!! The saw is Electric that I got for $20.00. You can't see the generator it's in my rear carryall. If you make one the saw has to be spring loaded so if you put too much down pressure it can move up.I just load the sring alittle and the saw goes right thru. It also has to move sideways so it's also spring loaded. If it's not spring loaded you well brake it off and bend your poles.
It works real well and very safe. Just keep the saw blade sharp. You can sure trim alot of trees in a short time.
The draw back is, on some trees you can't get real close to the tree.
Lee

Photo of the day
Just For Fun Off Topic
Replies 40 Post by leejohn