Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

I too am having a problem adjusting the clutch-throwout bearing on a Kioti LK3052 (2-wheel drive version of the LK3054). An earlier poster said:
-----
It takes a special wrench, you can make out of an old 14 mm, to unlock the lock nuts on 3 through bolts on the outside perimeter of the drive clutch pressure plate.With the locknuts released, you can use a socket to adjust the 3 bolts in or out to make the clutch engage sooner or later.Then retighten the locknuts. You can see the bolts thru the inspection plate om the right side of the tractor.The pressure plate will turn (if out of gear) to see all 3 bolts.You will see what I mean about the special wrench when you look inside.Cheers,Mike
-----
On mine, the lock nuts on the adjustment bolts are only 12 mm; the adjustment bolt heads are 14 mm; and there is no way a socket would fit onto the heads of the adjustment bolts because they almost contact the throwout bearing. (This is the gap we are adjusting to mere .000 s of an inch).

Clutch Adjustment Kioti LK3054
Kioti Tractors
Replies 6 Post by Stoutimore