Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

It sounds like you may have an issue with the ignition switch circuit or wiring. Here are a few steps you can take to troubleshoot the problem:

Check the Ignition Switch: Even though you replaced the ignition switch, it's worth double-checking to ensure it's functioning properly. Make sure all connections are secure and that there are no loose wires.

Inspect the Wiring: Examine the wiring harness connected to the ignition switch and starter solenoid for any signs of damage, such as fraying, corrosion, or loose connections. Pay close attention to any wires that may have been disturbed during the replacement process.

Test the Starter Relay/Solenoid: The fact that jumping the solenoid starts the tractor suggests that the solenoid itself is likely functioning correctly. However, it's still worth testing or replacing the starter relay to rule out any issues with it.

Check the Neutral Safety Switch: Some tractors have a neutral safety switch that prevents the engine from starting unless the transmission is in neutral. Ensure that this switch is functioning properly and that it's not stuck or damaged.

Inspect Fuses and Relays: Check all fuses and relays related to the ignition system to ensure they're not blown or faulty. Replace any that are damaged.

Test Voltage: Use a multimeter to test for voltage at various points in the ignition circuit, including the ignition switch, starter solenoid, and any associated relays. This can help identify any areas where there may be a loss of power.

New Holland TC45DA Wont start with the key
New Holland Tractors
Replies 4 Post by SteveF

I have had numerous labs and only one of them liked to do the manure roll, only after a washing though, nice.

My current lab is on a weight loss regime, and now likes to eat deer droppings as if it was kibble.

The Lab Manure Roll
Everything and Anything
Replies 40 Post by SteveF

I've added hydraulic fluid but still no luck. The arms do lift higher for a second but then drop back down. I currently have a carry all with 2x6's bolted on (about 300 lbs). Any suggestions?

Kubota B2100 3 pt Lift Height
Kubota Tractors
Replies 12 Post by SteveF