Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

You know it quit making that noise and heating up. We switched hydraulic connectors and it came out of it.

Looking for 1770 hyd pump
Belarus
Replies 34 Post by Chadk66

The series parallel switches are a PITA. I eliminated mine in short order and installed a 12V starter and lived happily ever after. There is most likely an issue inside it. You can take them apart and check it out

Belarus 820 keeps blowing fuse when I try to start
Belarus
Replies 2 Post by Chadk66

Put a block heater in it if you don’t have one. Then plug it in a few hours before you need it or if you use it daily leave it plugged in at night. Your motor will thank you

825 cold weather starting
Belarus
Replies 5 Post by Chadk66

I’ve ran rotella 15-40 in mine for years. Arguably the best diesel oil on the market

Best Engine oil for Belarus tractor
Belarus
Replies 4 Post by Chadk66

[QUOTE=notafarmer;201286] starting a new thread for electrical on the belarus 1770 4wd articulating tractor. this tractor was mfg in kharkov tractor plant in ukraine as model T ... [/QUOTE]yes the clunk is the ground going on and off when you hit it

belarus 1770 electrical
Belarus
Replies 3 Post by Chadk66

I run 15-40 rotella year round also

Winter oil viscosity for Belarus Tractor
Belarus
Replies 4 Post by Chadk66

Well I have an 825. My loader isn’t set up with a joy stick hydraulics. If you’re going to be using the loader a lot make sure you have one that has a joystick. The hydraulics aren’t fast at all. Top speed is provably about 25 I would guess. It’s not a smooth shifter at speed. You have to grind it in lol. As far as tilling you could do a 10’ cultivator if the soil isn’t compacted.

Need Advice on Buying Belarus 825
Belarus
Replies 2 Post by Chadk66