Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

got a hint for you on the hydraulic problem. On the right hand side of the hydraulic control lever is a flat oval shaped plate held down with to bolts. under this plate is a check valve. Remove the 2 bolts and lift off the plate and you will see what looks like a washer with the hole off center. under that is a spring. Sometimes this assembly will all raise up when you take off the plate. what has happened is that when you lost or got low fluid in the reservoir, you passed some trash thru to the check valve. A quick fix is to close the throttle and turn the engine over until you get a good gush of hyd. fluid up thru the check valve. reinstall the spring, washer and plate and your lift will work. This is a field fix, and at some point in time you will need to drain the reservoir, remove and clean the filter and flush out the reservoir and refill with new oil.
Ray

Belarus Hydraulic Problem
Belarus
Replies 20 Post by paparay

I have owned a Belarus 310 for about 10 years now, and other than the stupid things I did to break something, it has been a workhorse for me. However it has developed a habit of jumping out of gear under a load. The adjustment that is on the side of the gear box has not ever been able to adjust the problem out. I can run the adjusting arm all the way out and make it stay in gear, but then I can't shift to a higher gear when I want to. Turing the eyebolt end back the other way results in the same problem. Anyone have any input as to how to fix this?

Belarus 310 jump out of gear
Belarus
Replies 2 Post by paparay