Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Thanks Murf, I spent some time on the phone and found a 1902 close to home. The guy I called has one on the shelf rebuilt. The place I took the engine charged me over 700.00 to tell me the engine was junk! well I already knew that. And then told me the cost to rebuild was going to be 7000.00. I think were going to be boxing. So I have a 1902 engine, thanks for your help.

r-400 wheel loader
Kubota Tractors
Replies 4 Post by john

I recently starting working for a public works department and they have a New Holland TC40D with 500 hours on it. They purchased it new. From the first day it has had a rough idle, it surges between 800 and 900 rpms constantly. They have even had it back in the shop when it was under warranty but they said the problem was never fixed. I guess they don't care about it but it bugs me. Otherwise it is an awesome tractor. Does anyone know what the idle rpm's should be and what might be causing the rough idle?? Thank you for your time and help.

TC40D rough idlesurging
New Holland Tractors
Replies 3 Post by John

yes the 220 does have power streeing thank for the informantion

first tractor
Jinma Farmpro Agracat Nortrac
Replies 6 Post by john

hello all new to this but here goes i am looking to buy a new 220 jinma tractor here in north carolina for 4888.00 would like to know if this is a good tractor an what i should look for. i don't think its a epa an don't know what that means. i only have 3 acreas to care for an thought i mite buy a fel for it. scrape blade box blake, brush hog. will this tractor do the job. and what is the diffents in a none epa tractor and are parts east to get for both. here is the link to there web site.

first tractor
Jinma Farmpro Agracat Nortrac
Replies 1 Post by john

I am thinking of a new 4900 - not used - is that too hard to do ??? ie come up with a price, just can't understand that.

Has anyone bought a new Kubota this year close to this or these configurations? and if so would you like to share the price with me. I don't think I care about the dealer for I am thinking these tractors don't need a lot of work and repair after purchase - right? Usually a new product dealer never sees me again until I'm ready to buy or trade again.

Kubota 4900
Kubota Tractors
Replies 11 Post by JOHN

Looking for some body parts, rims, tires for a Kubota L-285 any suggestions would be appreciated.<br>
Thanks

Kubota L285
Kubota Tractors
Replies 2 Post by John

Well stopped at the Kubota dealer. They gave me a price of $7650 for a BX1500 with at 48" deck. That's after the $500 rebate that Kubota is running right now. Sound reasonable? That's set up and delivered to my door.

Very nice guys at the very least. They said that the promotion was running through December so need to decide then and there. They also let me drive a BX2300 around to get a feel for it.

To answer some previous questions. The logging road could pass as pretty 'civilized'. Its' not rutted or choppy. It was dozed pretty smooth and added water breaks before we seeded it. Like I mentioned before this tractor will be used mainly for mowing and hauling. I just wanted the added protection and traction that the BX line has to offer (4wd & ROPS).

From all indications it looks like the 1500 would fit the bill. It's still a lot of money for a 'mower' but you usually get what you pay for.

Is the BX1500 for me
Kubota Tractors
Replies 14 Post by John

Thanks for the help - will have to study this a little more.

John Deere 5301
John Deere Tractors
Replies 7 Post by John

I was looking for $8,500. Is this too much?

price of 2 wd 790
John Deere Tractors
Replies 4 Post by JOHN

need a fair market value on a l245dt with loader and mowing deck

price
Kubota Tractors
Replies 2 Post by john

I've inherited an L 1501 DT 4 wheel drive tractor with a Bush Hog 1840 QT front bucket. Included is a Howard Model HN Rotavator 48" PTO cultivator. I believe it was manufactured in the late 80's or early 90's. It now has 2071 hours and runs great. I've been told this is a grey market tractor but parts are interchangeable with a L-185DTP. Also, might you have some idea of it's value? <br>

L 1501 DT
Kubota Tractors
Replies 1 Post by John

i don't think that is a good question to be asking here....

looking for dallas gray market wholesaler
Jinma Farmpro Agracat Nortrac
Replies 2 Post by john

Looks like I broke something in the front 4 wheel drive of the tractor. Slipped a gear, broke a U joint.... something. I can not find a repair center. Please help

Shibaura 2843 Repairs
Shibaura
Replies 2 Post by John

Maybe one of you tractor wizards can help...I think I overfilled the oil by a quart or so..Now my Bx2200 doesn't want to start. Turns over fine and trys to start. {Yes I changed the oil and refilled to the proper level.}It almost starts but acts like its not getting fuel...Yes the tank is almost full from last weeks fullup.....Any ideas I've given up tonite after trying to start it 15 times or so.

kubota problem bx2200 help
Kubota Tractors
Replies 5 Post by john

Whats a fair price on a new one?

Kubota BX 23
Kubota Tractors
Replies 11 Post by John

15300 sounds like a great deal. I was quoted 17300 for the same tractor. What dealer gave you that price? I would like to look at them. John

price check on kioti
Kioti Tractors
Replies 18 Post by john

What is the best price I can expect from a dealership for a New Kubota B2910 w/front end loader ? Thanks

New Kubota B2910 w front end loader
Kubota Tractors
Replies 5 Post by John

Dave Simpson, I am planning on picking up a set of the trygg tractor chains, do you recomend rears only or all four. I have a mfwd tractor.

rigging tire chains
Snowblowers / Snow Plows
Replies 12 Post by john

Has anyone out there come up with something to breakup ice using a compact and rear blade. I am in the midwest and we tend to get more freezing rain than snow. My driveway is gravel so I have to be careful and not tear it up.

breaking up ice
Snowblowers / Snow Plows
Replies 10 Post by john

please don't give up on an old friend.
i also have one of these decks and the parts are available from any old time cub dealer. the spindles each use 2 standard bearings available anywhere and the cog pulleys should set you back around $50-60 each.

Mower deck for 1962 Cub
Cub Cadet
Replies 5 Post by john