Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

Well, I will report back. Mine did the exact same thing the others did with the same problem. I found that my sleeve had twisted in the bushing as well. I have some pictures posted in another forum at the link below. Here is how I diagnosed and fixed the problem. Only cost me about $100 I think to fix it and that was because I changed the Hydro Fluid and filter. Basically I bought a gauge and hooked it to the diagnose port on the hydraulic block underneath the tractor. This proved no flow/electrical problem. I then drained the case, removed the fluid tube, popped the back cover off, and pulled the PTO shaft and bushing plate. Then I pressed the bushing out, and pressed it back in at the correct orientation. I put it back together, and the PTO was turning again. and BTW, you do not have to remove the Rock shaft control cylinder to this. Total to remove was I think 12 bolts for the back place, 4 for the bushing plate, and one tube.

JD 4310 Rear PTO not turning
John Deere Tractors
Replies 18 Post by Clinton_FL