Go Bottom Go Bottom

Broken belts

View my Photos
Mariner
Join Date: Aug 2004
Posts: 1 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-08-30          94995

I have a Land Pride FDR 1548 mower. I mow about 3 acres of grass around my house. I have been having the belts come apart about every 3 mowings, approx. 12 hrs. There doesn't appear to be any damaged pulleys. Ikeep the rpms as specified by the manual. Any ideas what might be causing this?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Broken belts

View my Photos
oneace
Join Date: Mar 2004
Posts: 1490 south central pa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-08-30          95003

Sounds like a bent pulley housing. Did you hit any hard objects? Rock stumps ect. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Broken belts

View my Photos
Chief
Join Date: Jul 2003
Posts: 4297 Southwest MiddleTennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-08-30          95018

Check the mower pulley belt grooves for pieces of sticks or other debry that may be stuck inside the one or more of the pulley belt groove. My Deere F525 had a similar problem and was eating $37 belts. Also check the belt tension. Too much flapping around due to a bad idler tensioner spring or as already mentioned, a bent or misaligned pulley. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Broken belts

View my Photos
harvey
Join Date: Sep 2000
Posts: 1550 Moravia, NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-08-31          95028

Also check your pulleys and spindles for ease of turning. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Broken belts

View my Photos
yooperpete
Join Date: Jan 2004
Posts: 1413 Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-08-31          95044

If what the others have mentioned doesn't solve the problem consider if the belt is running through sharp bends. I have a belt driven rear tiller on one of my lawn tractors that was eating up belts because of the sharp bends. The cords were breaking! I ended up using a belt with Kevlar cords that solved the problem. These belts are blue in color and are only about another $5.00 more than standard. Also make sure you are using the correct cross-section size. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login