Go Bottom Go Bottom

PHD use

View my Photos
cobratodd
Join Date: Jan 2004
Posts: 26
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-03-23          80828

Any special tricks to using a 3-point PHD?
Never used one before, but will in the near future.
Thanks


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
Blueman
Join Date: Jul 2003
Posts: 243 Washington, PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-03-23          80837

The old one I've used, on the soil around me, generally required two people, one on the tractor controlling the lift and pto, and the other controlling (pushing down) on the PHD. If you have the type of hardpack I have, have some extra shear pins handy! ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
beagle
Join Date: Jan 2004
Posts: 1333 Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-03-23          80876

Just mounted my new PHD onto the tractor Sunday afternoon. After a few minutes of commenting how great it looked hanging off the back of the tractor, it was time to do family stuff. I have 125 holes to poke, Ill be watching this thread closely. Hopefully we can both learn something. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-03-24          80915

Like was said have plenty of shear pins on hand. Don't try to drill the hole in one fell swoop, as you're drilling pull the auger up a bit in the hole to allow it to clear the soil out of the auger, other wise if you hit a rock, root, or something that cuts a shear pin it's not quite as much of a pain go get the auger loose. Rocks are a piece of cake compared to tree roots. go slow and easy, a runing auger up out of the hole can be a nasty thing to get someone caught in. Best of luck and above all be carefull. Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
TomG
Join Date: Feb 2002
Posts: 5406 Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-03-24          80926

I know people do what Blueman said but serious injuries happen too. Augers are about the most dangerous of implements and I don't want anybody near one that's in operation. Easy for me to say I guess since I have easy dig sand for the most part, but I'd use sandbags if I needed down-pressure. Lots of people get their hands caught between frame members when taking augers on or off the tractor so be careful When dismounted they are really awkward things.

In addition the what's been said I'll add a bit. Be sure the shear bolts are the right grade. An auger can really bang a hitch around. I start at slow rpm's and the increase to pto rpm when the hole is going well. Some holes want to take off at an angle. I dig in my loader bucket and move the tractor a bit carefully with the bucket curl if needed to keep the hole going vertically. I take a 5' tempered pry bar and clamshell digger with me so I can break up and remove the inevitable pieces of rock that broke a pin.

I didn't take quite enough care marking my fence line and post locations. I compounded the problem by not starting the auger point exactly where I marked. I had to shave the sides of a fair number of holes to get a straight fence. Straight fences are next to godliness ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
oneace
Join Date: Mar 2004
Posts: 1490 south central pa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-03-25          81141

we sell a lotr of 3pt phds but i dond like them for one they dont reverse 2 the are combersom 3 down presure take my advice spend the money and get a bucket mounter hydraulic dive unit there worth every penny ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
TomG
Join Date: Feb 2002
Posts: 5406 Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-03-26          81178

Hydraulic augers sure are nice. I'd like one but I have to keep mind that an auger for me and many others is fairly project oriented--build a fence put up a pole building and maybe a retaining wall. I ran out of projects pretty quick and the auger has sat around for years. My very basic auger has done the job and the cost was low enough that I don't feel bad about it sitting around. Well, I do feel some building coming on so I'll likely get to know it again.

I've never stuck the bit and needed reversing but that may just be the soil here and there's a first time for everything. I do pull it up frequently to clear dirt out of the hole and keep the hole as vertical as I can, which helps to prevent stuck bits. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PHD use

View my Photos
oneace
Join Date: Mar 2004
Posts: 1490 south central pa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-03-26          81257

that is why there are rental yards now days the compition is fierce in that market so rental prices are favorable somtimes over purchase ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login