no power
cnote111
Join Date: Nov 2013 Posts: 2 rochester ny |
2013-11-04 188278
Good day all,,, I have an HPX, it was leaking some gas out of the carb, however it was still running well. I took it apart to check the float and needle and all looked good, I put it back together an now it has no power.. the gaskets were shot and the person before me put some of the self make blue gasket material all over within.. what would cause this lack of power? it runs ok at slow speed on a flat surface, when I lay into it or try to climb a slight hill it boggs right down and will actually stall. I have new jets and needle valve and plan on doing that this weekend. but would rather get it done complete while I have it out.
Thanks!!
Reply to | Quote Reply | Add Photo
no power
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2013-11-05 188282
My guess is you have an air leak where it screws together. kt ....
Reply to | Quote Reply | Add Photo
Go Top
Share This