Go Bottom Go Bottom

MF 135 lift arms won t lower

View my Photos
MMlmbr
Join Date: Jun 2013
Posts: 3 Lindale, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-06-18          187373

Recently bought this tractor, hydraulic lift was working. Next day, no position control. Would raise and lower with draft control. Removed lift cover, replaced fluid, filter,position control lever and roller. Now lift arms raise fully up and won't lower. Any suggestions?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



MF 135 lift arms won t lower

View my Photos
shona13
Join Date: Mar 2012
Posts: 32 Western Australia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-06-18          187380

Check the response lever on the sideplate where the trans dipstick is make sure it is not in slow.
Hutch. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



MF 135 lift arms won t lower

View my Photos
MMlmbr
Join Date: Jun 2013
Posts: 3 Lindale, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-06-18          187382

Doesn't matter what position the Response Lever is in. I tried the full range of travel. If I want to remove that cover, will I need to drain some of the fluid? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



MF 135 lift arms won t lower

View my Photos
shona13
Join Date: Mar 2012
Posts: 32 Western Australia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-06-20          187414

G'day.
If the oil level is on the high mark ,remove the sideplate ,theo one with the response control lever and refit one of the bolts in the bottom hole.
get good light in there and with the Draft lever in the UP position ,move the Position control lever up and down the control valve ,the one with the roller on it should be in contact with the lever AT ALL TIMES if not make surethe roller is AT THE FRONT of the lever.
Let Me know how you go with this and if no luck I will go further.
Regards.
Hutch. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login