Go Bottom Go Bottom

1996 Gator 2 x 4 Muffler

View my Photos
rmoehler
Join Date: Sep 2011
Posts: 2 United States
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-09-13          180333

The muffler for my gator has been "substituted" for a newer model that does not appear to fit. The style I need doesn't seem to be available via John Deere any more.
Does anyone have any information? I need part #AM116421 - which says to sub it out for part #'s AM125967 & AW26849. I bought the newer muffler and can not figure out how this version fits in any way, shape or form.
Would really appreciate any thoughts on this.
Best regards!


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



1996 Gator 2 x 4 Muffler

View my Photos
rkmich
Join Date: Feb 2012
Posts: 2 Twin Lake, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-02-07          182316

I had to replace my gator muffler with the new "upgrade" model also. The new muffler installs vertical (instead of horizontal like the original) between the clutches and exhausts out the bottom underneath the gator. The worst part about the installation was drilling a mounting hole in the frame under the rear axle (a 90 degree drill may make it easier. I only drilled one frame mounting hole and used a long bolt and spacer to make the muffler mount without any undue pressure on the muffler to motor mounting studs. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login