Go Bottom Go Bottom

Hinomoto tractor

View my Photos
josediaz
Join Date: Dec 2009
Posts: 11 Lytle Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2009-12-10          167409

Im having problems starting my tractor ive already disconnected the fuel rails and i am getting fuel,does any one have any other suggestions. One thing i also notice is i guess its a heater which is mounted behind the fuel pump well i think its a heater not sure but i do remember at times it did use to get hot but now its not could this be causing my promblem. I sure could use a little more troubleshooting skills if any ones able to help please. THANK YOU.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hinomoto tractor

View my Photos
purplehaze
Join Date: Jan 2010
Posts: 3 marble falls,tx.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-01-11          167983

try spraying wd-40 in the air intake as you are cranking the engine.if it try's to start then it is not getting fuel for what ever reason.do not ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hinomoto tractor

View my Photos
purplehaze
Join Date: Jan 2010
Posts: 3 marble falls,tx.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-01-11          167984

do not use starting fluid as it is hard on diesel engines ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hinomoto tractor

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-01-11          167985

Ether fluid is not hard on diesels when used in moderation. I used to drive a Perkins diesel in a delivery truck. It was equipped with a HotShot ether delivery system which looked like a small propane bottle. On cold days it took many shots or squirts to get it running.

Now, that said, some tractors I hear have flame-operated heater as described above which I would use caution around. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hinomoto tractor

View my Photos
NDNdave
Join Date: Mar 2010
Posts: 4 Ada OK
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-03-19          169376

Would u happen to know how to change out the PTO seal on a E14D? I cant get it to come all the way out it stops about 1/4 of a inch out. Thanks. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login