Go Bottom Go Bottom

Tea 20 Pto Problem

View my Photos
wendell38
Join Date: Sep 2008
Posts: 2 Brisbane Australia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-09-29          156921

Hi, New to site and new to Massey Grey's always wanted one, and now have one.
I have been slowly restoring,
I have a problem with engaging and dis-engaging.
I removed the Pto shaft to replace a leaking seal and bearing.
I imput the shaft and the side lever wont move, (I have removed R/H side plate to make sure the selector is in the slot)
When I first removed the shaft the lever was in the neutral position, But I later noticed it had shifted to the engaged position when it slide out.
I have removed/ in/out 4 times now putting the lever in each position.
So basically it is either engaged or dis- engaged in either position, it wont move.
Auy Idea's would be appreciated.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Tea 20 Pto Problem

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-09-30          156947

If you are searching the web you might want to refer the machine as a T-20 Ferguson.

I'm not an expert on the Ferggy, but I do know that the tractor was was patterned or copied from Ford's Fordson 9N 2N and 8N's. I'm not aware of any parts that actually interchange with Fords though.

So if you search for Ford's tractors having similar problems or issues that might be a huge plus. Good luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login