Go Bottom Go Bottom

Club Car or golf cart

View my Photos
denwood
Join Date: Jul 2004
Posts: 542 Quarryville PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-17          150279

I have a 1990 club car cart with the Kawasaki 4 stroke. It starts and runs fine, it has just stopped recharging the battery. I get several weeks of running before I have to recharge the battery. I am not familiar with the electronics inside and was wondering what some possible things to check may be. I assume the starter is the alternator and it works fine for starting. Is there a component the commonly goes bad?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Club Car or golf cart

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-17          150283

Not generally, I would start with some basic diagnostics.

Check that you don't just have a bad connections somewhere that is limiting (or preventing) charging of the battery.

These things don't exactly have a 100 amp charge circuit, all it takes is a bad connection or two to stop all charging.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Club Car or golf cart

View my Photos
denwood
Join Date: Jul 2004
Posts: 542 Quarryville PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-17          150303

This is the first thing to have ever broken on the cart and I have owned it almost 10 years. Thank you Kawasaki and Club Car for something that runs like a Honda. That being said, I am completely unfamiliar with the charging circuit and how it relates to the starting circuit. Any insite on the function would be great. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Club Car or golf cart

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-17          150313

Do you have a starter / generator combination unit, a conventional starter and a magneto for charging?

They built them both ways over the years.

Best of luck ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Club Car or golf cart

View my Photos
denwood
Join Date: Jul 2004
Posts: 542 Quarryville PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-17          150318

It has what looks like a generator/alternator for a starter with a belt to the engine. Pedal start so you never let off the start position while running. That's why I guessed it was both. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Club Car or golf cart

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-18          150372

OK, yes that's right, a belt-driven starter is a sure sign it's also a generator.

Note I said 'generator' not alternator. It is a simple thing to do, any motor when spun will give you back some power when wired correctly.

You should have 3 wires coming off of it. A single wire at one terminal, and 2 on the other, the single wire is the "field" wire, we'll call 'F' here, and the other two are "armature" wires. We'll call them 'A1' & 'A2' here.

Now the way it works is, when you step on the pedal (or hit the key) you connect making a complete circuit in 'A1' between a 12volt battery and the motor and 'F' causing the motor to spin starting the engine. Once the starter solenoid is out of the circuit 'A1' (between motor & battery directly) once again becomes an open circuit, leaving only 'F' & 'A2' (which runs to the regulator) intact, and since the motor is still spinning (and now a generator) because it's belted to the engine, the battery should charge.

In your case though something went south. Check first that you have power between the two terminals of the starter / generator while the engine is running. I bet you will, they rarely go. Now check all connections to see if there is corrosion messing things up, a generator has a very feeble output, it doesn't take much. If everything is clean and making a solid contact, you need a new regulator.

If you have any problems, give a shout.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login