Sub frame for B7100HSTE old type
mike s
Join Date: Oct 2003 Posts: 11 PA |
2003-10-15 66340
I am in need of a part called the "forward frame" for my plow/snow blower frame. I am going to mount a plow. If any of you have this piece and can give me some measurements I will fabricate my own. If any of you have an extra one laying around let me know. The model # is B204/B205
Thanks in advance
Mike S.
Reply to | Quote Reply | Add Photo
Sub frame for B7100HSTE old type
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2003-10-16 66358
If nothing else pops up, Allied had tech drawings for their loader frames on their site--at least before Buhler bought them. I guess this is for a front plow and maybe a loader frame would do the job. ....
Reply to | Quote Reply | Add Photo
Sub frame for B7100HSTE old type
mike s
Join Date: Oct 2003 Posts: 11 PA |
2003-10-16 66391
This is for a plow. I have the frame that bolts to the tractor, the part I need goes between the plow and the frame that bolts to the tractor. Thanks for the suggestion though!
Mike ....
Reply to | Quote Reply | Add Photo
Sub frame for B7100HSTE old type
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2003-10-16 66395
Mike, you have the blade frame, you have the blade, take your measurements and run. Remember to keep the blade as close to the front of the tractor as you can so you won't have the front of the tractor drifting while the blade is angled. It has to be some type of a V type configuration. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This