Go Bottom Go Bottom

Seeding the lawn

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-04-02          152671

Murf; This weekend our lawn should be just about right to roll, not to wet, not too dry. OK, how about me spreading a top dressing of seed on the existing lawn then rolling it in right behind the broadcast seeder???? This just sounds way too simple to have it work, whaddya think???? Frank.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-02          152673

Frank, I think you're on the right track..... it's way to work. ;)

Seriously, it will work, but not well. I have no doubt that you (like me) have been kicking clods of dirt way to long to need much of a lesson on growing things, but turf is a little fussier than soybeans.

If you want to make a proper job of it, you need to do a little more prep work first.

First of all, cut the existing lawn real short if it's already popped, about 1.5" - 2" at most. This will both help the seed reach the ground, but most importantly help it get the sunshine it needs to germinate. Keep the grass cut to this height for a month if possible.

Then either dethatch or rake it very well to get all the clippings off the lawn you can.

Now you can put down the seed. Apply it according to the rates listed in the instructions supplied for 'overseeding' not new lawns.

After seeding, but before rolling it in, put down some starter fertilizer. This will really help since the new seedlings will be competing with the existing lawn for nutrients and water.

Now you can roll the new seed & fertilizer in.

Note: The usual disclaimers about me not being liable for the amount of time you spend cutting your lawn or explaining to neighbours how you got such a nice lawn apply. ;)

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-04-02          152677

Murf; Once again thanks for your help an expertise. Just a bit ago I ordered the Kentucky bluegrass seed and the fertilizer, I will follow your advice to the letter. Last spring I took soil tests and followed the recommendations and applied lime and fertilizer, (9-18-9). The local elevator sells a generic bagged 9-18-9, hotmix, not cold blend for about half what the bigname lawn care fertilizers sell for in the bright beautiful bags at a lawn and garden center. Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-03          152689

Quote:
Originally Posted by hardwood | view 152677
The local elevator sells a generic bagged 9-18-9, hotmix, not cold blend


Frank, what is the difference between a "hotmix" and a "cold blend"? Thank you, kt ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-03          152698

Kenneth, not to answer for Frank, but.......

Fertilizers are blended from several different base mixtures into one homogeneous mixture.

They are made by mixing either wet or dry ingredients into pellets. The problem with dry mixed formulas is it's hard to get a very uniform mixture in each pellet. In the case of lawn fertilizers, one of the key goals is a very equalized application to avoid burning the turf. This is best done by using a wet mix formula.

The reference to hot or cold mix relates to the way the fluids are blended. In the case of a hot mix formula, the plant blends ammonia with phosphoric acid, the resulting reaction releases considerable heat energy. This results in a better end product.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-03          152702

Murf, following up on the mix:
if mixed after mfg process it would have to be a cold mix then, correct?

But, how does that show up when used? Does it only show up in "burning the turf"? Does that mean it will burn if applied to the leaves or will it also burn a crop when applied to the root zone?

So, does the label tell you it is a "HOT" mix or what is the wording that tells this.

Thanks, kt ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-03          152704

Kenneth, the hot or cold part of it with regard to liquid-based fertilizers is purely a chemical reaction.

Cold mixed fertilizers just don't use an ammonia / phosphoric acid blend to create heat that's all.

The difference is in how they are applied and the way they work. Hot mix fertilizers are generally slow-release formulas. Cold mix are faster releasing and are generally put into the soil rather than one the top.

If you are going to expose fertilizer to rain, etc., you want it to be as homogeneous as possible so that the various components are given off in equal amounts, and not one component first because it's the most soluble.

Poor quality fertilizer will not necessarily yield something that is readily visible to the average person, like burning, but that is one example. Usually it's just a very uneven application, some components are given off faster or slower, and that can stress the turf.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-04-03          152706

KT, There are the three most common basic elements Nitrogen=N Phosphate=P and Potash=K. Ok now pretend you have two boxes of marbles, one box has three different color marbles. Let's say the N marbles are red, the white marbes are P, and the blue marbles are K, if you dump them out on the ground, they won't likely be distributed evenly, so one sopt will have pure N one spot will have pure P, and another spot wull have only K. Now the other box had the three different colors of glass mixed together before they formed them into marbels, so when you dump that box wherever any marble lands the same ratio of N-P-K will be on the same spot. Most bagged fertilizers will be a hot mix. Cold blends are for the most part used at the local level to custom blend the ratio of NPK needed to satisfy a soil test. they just dump the three elements in the right ratio into a mixer drum, then into the spreader to go to the field. Frank ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-03          152707

Quote:
Originally Posted by hardwood | view 152706
Most bagged fertilizers will be a hot mix. Cold blends are for the most part used at the local level to custom blend the ratio of NPK needed to satisfy a soil test. Frank


Now how come I can't put it that simply? :(

Well done as usual Frank.


Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-04-03          152708

Well Murf, now thanks for the compliment, but I never in a hundred years could have spelled Homogenous, or how ever you spelled it. Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-04-03          152710

Quote:
Originally Posted by Murf | view 152707
Now how come I can't put it that simply? :(Well done as usual Frank.Best of luck.


Murf, maybe you lost your marbles?

Frank did make it simple. He never could serve in congress. kt ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Seeding the lawn

View my Photos
hardwood
Join Date: Dec 2002
Posts: 3583 iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-04-06          152782

Saturday was as nice as it gets around here so I reseeded with Kentucky Bluegrass with my little John Deere areiatior seeder combo. The fertilizer shipment hasn't got to the elevator yet so I'll put that on later. I never was real happy with the little plastic lawn roller we had so I bought a bigger steel drum model made by Agri-Fab, it weighs about half a ton when loaded with water. The 345 mower seemed a bit unsafe going down hill so I used the Gator, it handled it nicely. The new heavier roller sure did a nice job, guess I should have had it long ago. Frank. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login