Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Thanks for the reply... Good idea trying it with the blades removed. Since they are new blades and that did not change anything I could deduce it was a spindle, the belt, or the shaft.

I could disconnect the belt and try to run the PTO to see if the shaft was creating it.

Will replace the belt to test that, relatively cheap and good to have a replacement.

How could I test the spindles individually? None of them feel like there are bearings missing, etc. I also measured the distance on both ends of each blade to the edge of the deck to get a reference and it appears as though no spindles are bent.

JD 855 - 60 MMMower Vibration Problems
John Deere Tractors
Replies 15 Post by SmittyJD

It's often useful to keep old posts around since the information might be useful to someone.

Perhaps if it has been a long time since a thread was active it could be made read-only or a warning message could be displayed to tell new posters that they are posting to an old thread.

Need help with 4x6 Gator 3 Cyl Diesel Engine problem
Parts and Repair
Replies 19 Post by kwschumm

Bob, if your serial number is WOO6X4X024590 or something like that you have a water pump. It's that little thing behind the muffler, bolted to the case cover, that the radiator hose goes into. It's not a hard repair, but if you can't find the water pump you may have another whole different motor in there and I may be blowing in the wind. If you can find it, my previous post applies.

gator runs wide open
Utility Vehicles UTV/ATV
Replies 7 Post by gatoraider

Charlie, we've run into this lots with dealer parts.

In fact in some cases, if the gouging wasn't so extreme it would be downright funny!!

Case in point, my dealer has one (1) type of hydraulic quick connects in stock, if you look up the male end as a 'jobber' part, it is ~$7/each, if you look it up by the 'bota part number, it is ~$27/each or nearly four times the price.

Seal kits are another one, go to any decent hydraulic shop or industrial supply house, I think you'll find that same kit is about $30 / each.

Best of luck.

Cylinder seal replacement
Loaders Back Hoes
Replies 21 Post by Murf

There were a series of cracks ranging from 1/8" to 1/4" in the poured slab floor of our basement. They poured it on the hottest day of the year and didn't take any steps to keep it wet so it cured too fast. Near the end of the one year warranty period we had the concrete contractor come out and patch the cracks. He used a hard patch compound that didn't match in color and a year later all the patches cracked just like before. This experience tells me that the only patch compound that has any chance of holding would need to be a flexible compound.

Concrete Salt Etching
Home Improvement
Replies 11 Post by kwschumm

I don't know anything about any manufacturing standards for blades, but I had always used Deere blades till someone convinced me to buy a set of Gator blades, what a high priced joke. I use them to grind up walnuts in the fall rather than raking them all up. Frank.

MowProducts com
Garden and Landscape
Replies 23 Post by hardwood

Thanks for the advise, I will check it out!

JD 855 PTO fuse blowing various times during mowing
John Deere Tractors
Replies 5 Post by SmittyJD

I'm looking at a 7304 tractor. the unit was very well kept, with only 96 hours on it. Does anyone have any input on this unit. Dependability, strengths, weaknesses etc...<br>
Thanks<br>
Paul

Cub Cadet 7304 Advice
Cub Cadet
Replies 3 Post by DITTO22

Just so EVERYONE ELSE is up to speed, Murf's referring to an email I recently sent him about a nice, $1250 skid steer-mounted hydraulically-powered snow blower for sale locally (to me) I found on Craigslist.

My bad (sniffle)

Being the NICE guy I am, and the tightwad Murf is, I thought he'd really appreciate the lead (read: jump and down with glee). Buuuut, sadly, I was wrong. 'parently Murf's got soooo much money that he'd rather pay MORE in-season. 'round here, we have a saying that goes: "NOBODY buys a boat in the spring (or you'll pay more than in the fall or winter).

Man, if I had feelings they'd be hurt--I'm jis' sayin'.

I'm o o ok (sniffle) k k k kay (sniffle). I'll be in my (chat) room.

Trailer comes off at 75mph
Pickup Trucks and Trailers
Replies 91 Post by earthwrks

[QUOTE=lsheaffer;149847] I can supply you with the closest manuals. [/QUOTE]Can you also supply manuals for a P155F?

Shibaura D23F Tractor Manual
Shibaura
Replies 18 Post by tmbeck4

Fluids were full. I have checked all shafts and bearing thru the rear end. It will be back together in a week with the new style PTO and I will post the results. Thanks for the help.

825 Belarus PTO noise
Belarus
Replies 5 Post by johnwi

Ihave a shibaura-P155F.Looking for parts {clutch} and manuals.Anybody know where or who stocks it?Terry

Shibaura P155F Manual and Parts
Shibaura
Replies 1 Post by tmbeck4

Follow the brake pedla lingaeand ther you will find the swicth. It may be out of adjustment, have a bad or loose connection, or a bad switch.

The seat swicth is doing its job when you leave the seat. You could use a bungy strap to hold the seat down, or like I do with my skid steer, install a toggle switch in the seat circuit that makes the system think you're still in the seat. My buddy does a similar thing with his skid steer seat switch, only he disconnected it and uses a short jumper in the connector to take the place of the switch. If your New Holland is anything like my TC33D, LOL eventually you won't even need a seat switch since the wiring and safety module usually go bad in no time. Mine went bad after less than 100 hours.

New Holland Tc24d Brake Safety Switch
New Holland Tractors
Replies 2 Post by earthwrks

Following your instructions I watched the shaft as I moved the speed control forward and back with the tractor not running. I need to load some haqy so I started the tractor with the PTO engaged. It worked so It sounds like you hit the nail on the head. the roll pin was the problem. Thank you for all your help.

Jinma 204 PTO problem
Jinma Farmpro Agracat Nortrac
Replies 5 Post by JGuinn

The PTO is strictly mechanical, no "valve". I suspect you're looking at the wrong page, possibly the rear hydraulic lift. The PTO mechanisms are under that sump, internal to the rear differential housing.

//greg//

PTO
Jinma Farmpro Agracat Nortrac
Replies 12 Post by greg_g

Thanks for the advice. I'll try this tonight and see if it helps.

Iseki Starter Clicks Problem
Other Tractor Brands
Replies 5 Post by pinktractor

Bob, since there was nothing coming out the overflow tube everything was probably working right. Sounds like a bad air filter clogged up your intake passage and it may take awhile to get it clear. Typically, run on after you shut it off, is needle and seat or elevated rpm at idle, but you probably have some unburned residue in there, caused by the rich condition, that will clean out with use.

gas in crankcase
Utility Vehicles UTV/ATV
Replies 11 Post by gatoraider

Does anyone have a good source/recommendation for a Forest Service approved spark arresting muffler? I have a 2008 CX with the 10 hp Kawasaki. I think it was an option but before I go back to the dealer I thought i'd ask.<br>
Thanks.

Spark Arrestor- Compact Gator
Utility Vehicles UTV/ATV
Replies 1 Post by gatormaki

Sorry I can not help you with your direct question but why not open up to other brands such as John Deere or Kubota or even further. I think you will find either JD or Kubota to be as of good quality as the NH. There are some guys here who live in NY guess they either have no suggestions or have missed your question.

NY State dealer prices
New Holland Tractors
Replies 8 Post by kthompson

Woods makes lots of frame mounts for compact tractors. I looked up a mounting kit manual for yours and the link is below. Looks like they only put on the 7' and 8' models. Mine is the new 9' with thumb and it works great!

woods ground breaker hoe
Loaders Back Hoes
Replies 3 Post by mistrbackhoe