Go Bottom

Anyone have any info on this tractor

View my Photos
Chaos921
Join Date: Mar 2017
Posts: 6 Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-03-30          196435



Is this an Allied tractor?

I was told it was a 99 model.

But as you can tell it has been painted and a decal that doesn't fit made for it.

I can't find any information on a 99 Allied tractor or much info on any Allied tractor for that matter.

Any information would be great.

It has some hydraulic issues I would like to fix but cant seem to find parts.


Picture Link



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Cyrus55
Join Date: Feb 2012
Posts: 58 W TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-30          196436


It looks like a Maverick 180, same as a Jinma 180. Should be a data plate under the seat, I think. Do you have a 2 cylinder or 3 cylinder diesel engine, also with a data plate. Jinma made these and they were picked up by several companies and badged for them, hense the Maverick name. Many other names are attached to this model, also. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Chaos921
Join Date: Mar 2017
Posts: 6 Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-03-30          196437


It has a 2 cylinder engine. I can't find any plates or serial type numbers any place on the tractor. It has two Chinese words on the side of the engine, and several on the starter and tires. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Chaos921
Join Date: Mar 2017
Posts: 6 Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-03-30          196438


On the side of 3 point hydraulic reservoir. ....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Cyrus55
Join Date: Feb 2012
Posts: 58 W TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-30          196439


I WAS going to go out side and look at mine, but........laziness took over.
I just read, on another site, that it is possible that several different factories build Jinma tractors over in China.....and they may not be all the same. Based on your description, you should have a TY290 engine. The data plate for it should be on the side of the block. I do have a second tractor that has no markings on it and the engine, too, looks like a TY290. It is badged as a Agrineer/Simple Simon. Fenders are different than on the Maverick. Your fenders look like a Maverick. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Chaos921
Join Date: Mar 2017
Posts: 6 Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-03-30          196440


If I am sitting in the seat of the tractor the two Chinese words are on the left side of the motor. And on the right side it has a large blank flat spot, and on this flat spot I see four small holes. My guess is this is where the idenifation plate would have been?
I have been looking at all the different jinma tractors and the hydralic parts for the 3 point lifts and can't seem to find any that look similar to mine.
So my search continues!
Thank you for all the information you have been sharing with me! ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Cyrus55
Join Date: Feb 2012
Posts: 58 W TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-30          196441


Send me a picture of the hydraulic parts you're referring to. Maybe I can ID more info from that.
I have gotten parts for mine from CircleG tractor parts located in Nashville, TN. They have a website. They try to stock parts for the older 2 cylinder tractors. I had to get a head gasket. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Anyone have any info on this tractor

View my Photos
Chaos921
Join Date: Mar 2017
Posts: 6 Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-03-30          196442


I would like a breakdown of this. And a rebuild kit. I am also needing a new washable screen, that one is full of holes! ....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login