Go Bottom

Jack Stand Wheel

View my Photos
dkheckmanl
Join Date: Dec 2003
Posts: 134 Middleton, ID
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-13          119313


I recently purchased a Load Trail dump trailer with a 2 inch square jack stand. I was thinking about putting a wheel on the jack stand so I can push it by hand into its final storage resting place inside my shed. The fit is tight going through the door and inside the shed and I am not a very good backer. Does anyone know where I might find a jack stand wheel with a square shaft rather than a round one?



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
JiminMaine
Join Date: Jul 2004
Posts: 13 Yarmouth, Maine
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-19          119557


Have you asked the trailer dealer if there is an optional wheel? Or maybe somebody local that does trailer repair? It's funny, I always take the wheels off our jacks so the trailers don't roll away! ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-20          119571


You might also consider one of those those wheeled thingies, it looks kinda like a handtruck with a trailer ball on it.

Northern Tool and Harbor Freight sell them. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
Peters
Join Date: Feb 2002
Posts: 3034 Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-20          119574


My area is also a little tight. It is quite easy with the tractor do you have a ball on the tractor? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
AV8R
Join Date: Oct 2003
Posts: 882 North Central Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-20          119576


I agree with Peters, get a ball on the tractor for parking.

Those wheels on trailer tongue jacks are horrible. It will allways want to roll the wrong way. I have a dent in my Truck's bumper to proove it! ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
JiminMaine
Join Date: Jul 2004
Posts: 13 Yarmouth, Maine
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-20          119595


I also agree that the tractor's a great way to jockey the trailer around. In fact, the ball mounted on the 3PH is really slick. You can back up to the trailer, raise the ball and grab it, don't even have to get off the tractor. It also puts the ball farther out back so you can really turn super tight. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
dkheckmanl
Join Date: Dec 2003
Posts: 134 Middleton, ID
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-21          119671


Thanks for the input. Sounds like the tractor with the ball hitch is the way to go. Any suggestions on what currently is the best reciever adaptor on the market? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
yooperpete
Join Date: Jan 2004
Posts: 1413 Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-22          119674


Dennis had rolled this thread also over to Manepoint. I had commented on the part number for the wheel assembly. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
JiminMaine
Join Date: Jul 2004
Posts: 13 Yarmouth, Maine
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-22          119682


There are several different manufacturers of the 3PH receiver hitches. One advertizes right here, Summit Fabrications. I got a smaller version from them, that bolts on a standard 3PH drawbar. One thing you have to be aware of is there is no down pressure with the 3PH, so if the trailer was balanced heavy in the rear it could lift up the tongue and the 3PH. You can put on a safety chain to limit the upward travel of the 3PH. I have not found it to be a problem. I also bolted a ball-mount on the back of my rear blade, so I can move trailers when I'm cleaning up snow. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-22          119683


Good hitch at a better price and it comes with a safety chain to prevent damaging your three point hitch...... ....


Link:   

Click Here


 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-22          119684


Another option would be to mount a 2 inch receiver on your FEL bucket. It is really easy to put trailers in tight places with a front hitch. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
Peters
Join Date: Feb 2002
Posts: 3034 Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-22          119698


That is what I was going to recommend. Trailer dealers use a front hitch on the FEl to push trailers into small spots. ....


Link:   front mount hitch

 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-25          119831


If you have a goose neck trailer they make the 3 point model with ball on top for them also in same unit with lower ball as was being talked about here. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-27          119955


Peters suggested I post some links on this thread..... ....


Link:   

Click Here


 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-27          119956


And this one......... ....


Link:   

Click Here


 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-27          119957


And here is another......... ....


Link:   

Click Here


 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
dkheckmanl
Join Date: Dec 2003
Posts: 134 Middleton, ID
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-01-01          122123


I ended up getting both a Bad River 3pt adaptor and a bucket ball clamp on from Payne. I used the ball clamp this weekend to park my trailer in my shed. Had about 2-3 inches clearance on each side. It was a breeze pushing it through with the tractor. I will use the 3 pt adaptor to do some hauling next summer. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-01-02          122125


What do you think of the Payne clamp on ball?

I was concerned that it might pull off or move around the bucket with heavy loads. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Jack Stand Wheel

View my Photos
dkheckmanl
Join Date: Dec 2003
Posts: 134 Middleton, ID
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-01-02          122142


I had no problem with my empty trailer that weighs about 2800 lbs but you might be right with a heavy load. I see they sell a stabilizer for their forks which tells me that they may move around. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login