Go Bottom

shibaura p19f 3 point hitch hydraulics

View my Photos
meathead2010
Join Date: Jan 2014
Posts: 3
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-01-21          188723


I have a shibaura p19f tractor that has the electric solenoid controlled 3 point hitch and they do not work. I have looked high and low and can not find these. a couple of people have told me that some of these had manual controls for the 3 point hitch. do any of you know where I might be able to purchase these controls or do you know of any way I can convert it over to some type of manual lever control valve. any advise you have will be greatly appreciated.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



shibaura p19f 3 point hitch hydraulics

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2014-01-22          188725


I can't help you with the parts, but do you know why the electrics don't work?

Are the solenoids bad or switches / wiring?

The solenoids and switches are very likely off the shelf parts, not custom made, so any good electric supply place could likely source you replacements.

Beyond that, anybody who's halfway decent with electrics could hobble something to together to at lest get you going until you can come up with manual parts.



Best of luck. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



shibaura p19f 3 point hitch hydraulics

View my Photos
meathead2010
Join Date: Jan 2014
Posts: 3
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-01-22          188727


i know that both the solenoids are bad and the company that originally made them is no longer in buissness. the hyd. part of it seems to function fine when i engage them manually by hand. i was just wondering if there was a way to convert it to manual lever controls to keep from having this problem in the future. i have a manual 2 way lever control valve that i can mount on a bracket on my fender if i could figure out which hyd port is what so that i can hook them up correctly. by running hyd. flex lines to them. if anyone knows a way to accomplish this please let me know or if you have run into this issue and know where i may be able to find some parts to repair it manual or electric. thank you for all you advice and have a blessed day. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



shibaura p19f 3 point hitch hydraulics

View my Photos
fercarbar
Join Date: May 2014
Posts: 2 Portugal
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-05-08          190274


I have a p19f, and it has the same problem.
Do you find any solution?
I'thinking adapt a external solenoid valve found on ebay ((to push it when i want to lift) ....


Link:   

Click Here


 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login